#!/usr/bin/perl -w 
############################## check_snmp_css_main.pl #################
# Version : 1.0
# Date : 27 Sept 2006
# Author  : Patrick Proy ( patrick at proy.org)
# Help : http://www.manubulon.com/nagios/
# License : GPL - http://www.fsf.org/licenses/gpl.txt
# Changelog :
# Contributors :
#################################################################
#
# Help : ./check_snmp_css.pl -h
#

use strict;
use Net::SNMP;
use Getopt::Long;

# Icinga specific
my %ERRORS = ('OK' => 0, 'WARNING' => 1, 'CRITICAL' => 2, 'UNKNOWN' => 3, 'DEPENDENT' => 4);

# SNMP Datas

my $css_svc_table   = "1.3.6.1.4.1.9.9.368.1.15.2.1";       # Svc table
my $css_svc_name    = "1.3.6.1.4.1.9.9.368.1.15.2.1.1";     #  Service Name / apSvcName
my $css_svc_index   = "1.3.6.1.4.1.9.9.368.1.15.2.1.2";     #  apSvcIndex
my $css_svc_enable  = "1.3.6.1.4.1.9.9.368.1.15.2.1.12";    #  apSvcEnable
my $css_svc_state   = "1.3.6.1.4.1.9.9.368.1.15.2.1.17";    #  apSvcState : suspended(1),  down(2), alive(4), dying(5)
my $css_svc_maxconn = "1.3.6.1.4.1.9.9.368.1.15.2.1.19";    #  Max connexions / apSvcMaxConnections
my $css_svc_conn    = "1.3.6.1.4.1.9.9.368.1.15.2.1.20";    #  apSvcConnections
my $css_svc_avgresp = "1.3.6.1.4.1.9.9.368.1.15.2.1.65";    #  apSvcAvgResponseTime : average response time
my $css_svc_maxresp = "1.3.6.1.4.1.9.9.368.1.15.2.1.66";    #  apSvcPeakAvgResponseTime : peak response time
my @css_svc_state_txt = ("", "suspended", "down", "", "alive", "dying");
my @css_svc_state_nag = (3, 2, 2, 3, 0, 2);

# Globals

my $VERSION = "2.0.0";

my $o_host      = undef;                                    # hostname
my $o_community = undef;                                    # community
my $o_port      = 161;                                      # port
my $o_help      = undef;                                    # wan't some help ?
my $o_verb      = undef;                                    # verbose mode
my $o_version   = undef;                                    # print version
my $o_timeout   = undef;                                    # Timeout (Default 5)
my $o_version2  = undef;                                    # use snmp v2c

#Specific
my $o_dir = "/tmp/";                                        # Directory to store temp file in it.

# SNMPv3 specific
my $o_login     = undef;                                    # Login for snmpv3
my $o_passwd    = undef;                                    # Pass for snmpv3
my $v3protocols = undef;                                    # V3 protocol list.
my $o_authproto = 'md5';                                    # Auth protocol
my $o_privproto = 'des';                                    # Priv protocol
my $o_privpass  = undef;                                    # priv password

# functions

sub p_version { print "check_snmp_css_main version : $VERSION\n"; }

sub print_usage {
    print
"Usage: $0 [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>]) [-d directory] [-p <port>] [-t <timeout>] [-V]\n";
}

sub help {
    print "\nSNMP Cisco CSS monitor MAIN script for Icinga/Nagios/Naemon/Shinken, Version ", $VERSION, "\n";
    print "GPL License, (c)2004-2006 Patrick Proy\n\n";
    print_usage();
    print <<EOT;
-v, --verbose
   print extra debugging information 
-h, --help
   print this help message
-H, --hostname=HOST
   name or IP address of host to check
-d, --dir=<directory to put file> 
   Directory where temp file with index is written
-C, --community=COMMUNITY NAME
   community name for the host's SNMP agent (implies v1 protocol)
-2, --v2c
   Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
   Login and auth password for snmpv3 authentication 
   If no priv password exists, implies AuthNoPriv 
-X, --privpass=PASSWD
   Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
   <authproto> : Authentication protocol (md5|sha : default md5)
   <privproto> : Priv protocole (des|aes : default des) 
-P, --port=PORT
   SNMP port (Default 161)
-t, --timeout=INTEGER
   timeout for SNMP in seconds (Default: 5)
-V, --version
   prints version number
EOT
}

# For verbose output
sub verb { my $t = shift; print $t, "\n" if defined($o_verb); }

sub check_options {
    Getopt::Long::Configure("bundling");
    GetOptions(
        'v'           => \$o_verb,
        'verbose'     => \$o_verb,
        'h'           => \$o_help,
        'help'        => \$o_help,
        'H:s'         => \$o_host,
        'hostname:s'  => \$o_host,
        'p:i'         => \$o_port,
        'port:i'      => \$o_port,
        'C:s'         => \$o_community,
        'community:s' => \$o_community,
        'l:s'         => \$o_login,
        'login:s'     => \$o_login,
        'x:s'         => \$o_passwd,
        'passwd:s'    => \$o_passwd,
        'X:s'         => \$o_privpass,
        'privpass:s'  => \$o_privpass,
        'L:s'         => \$v3protocols,
        'protocols:s' => \$v3protocols,
        't:i'         => \$o_timeout,
        'timeout:i'   => \$o_timeout,
        'V'           => \$o_version,
        'version'     => \$o_version,
        '2'           => \$o_version2,
        'v2c'         => \$o_version2,
        'd:s'         => \$o_dir,
        'dir:s'       => \$o_dir
    );

    # Basic checks
    if (defined($o_timeout) && (isnnum($o_timeout) || ($o_timeout < 2) || ($o_timeout > 60))) {
        print "Timeout must be >1 and <60 !\n";
        print_usage();
        exit $ERRORS{"UNKNOWN"};
    }
    if (!defined($o_timeout)) { $o_timeout = 5; }
    if (defined($o_help))    { help();      exit $ERRORS{"UNKNOWN"} }
    if (defined($o_version)) { p_version(); exit $ERRORS{"UNKNOWN"} }
    if (!defined($o_host))    # check host and filter
    {
        print_usage();
        exit $ERRORS{"UNKNOWN"};
    }

    # check snmp information
    if (!defined($o_community) && (!defined($o_login) || !defined($o_passwd))) {
        print "Put snmp login info!\n";
        print_usage();
        exit $ERRORS{"UNKNOWN"};
    }
    if ((defined($o_login) || defined($o_passwd)) && (defined($o_community) || defined($o_version2))) {
        print "Can't mix snmp v1,2c,3 protocols!\n";
        print_usage();
        exit $ERRORS{"UNKNOWN"};
    }
    if (defined($v3protocols)) {
        if (!defined($o_login)) {
            print "Put snmp V3 login info with protocols!\n";
            print_usage();
            exit $ERRORS{"UNKNOWN"};
        }
        my @v3proto = split(/,/, $v3protocols);
        if ((defined($v3proto[0])) && ($v3proto[0] ne "")) { $o_authproto = $v3proto[0]; }    # Auth protocol
        if (defined($v3proto[1])) { $o_privproto = $v3proto[1]; }                             # Priv  protocol
        if ((defined($v3proto[1])) && (!defined($o_privpass))) {
            print "Put snmp V3 priv login info with priv protocols!\n";
            print_usage();
            exit $ERRORS{"UNKNOWN"};
        }
    }
    if (defined($o_dir)) {
        verb("Tmp directory : $o_dir");
    }
}

########## MAIN #######

check_options();

# Check timeout if snmp screws up
if (defined($o_timeout)) {
    verb("Alarm in $o_timeout seconds");
    alarm($o_timeout);
}

$SIG{'ALRM'} = sub {
    print "No answer from host $o_host:$o_port\n";
    exit $ERRORS{"UNKNOWN"};
};

# Connect to host
my ($session, $error);
if (defined($o_login) && defined($o_passwd)) {

    # SNMPv3 login
    verb("SNMPv3 login");
    if (!defined($o_privpass)) {
        verb("SNMPv3 AuthNoPriv login : $o_login, $o_authproto");
        ($session, $error) = Net::SNMP->session(
            -hostname     => $o_host,
            -version      => '3',
            -username     => $o_login,
            -authpassword => $o_passwd,
            -authprotocol => $o_authproto,
            -timeout      => $o_timeout
        );
    } else {
        verb("SNMPv3 AuthPriv login : $o_login, $o_authproto, $o_privproto");
        ($session, $error) = Net::SNMP->session(
            -hostname     => $o_host,
            -version      => '3',
            -username     => $o_login,
            -authpassword => $o_passwd,
            -authprotocol => $o_authproto,
            -privpassword => $o_privpass,
            -privprotocol => $o_privproto,
            -timeout      => $o_timeout
        );
    }
} else {
    if (defined($o_version2)) {

        # SNMPv2 Login
        verb("SNMP v2c login");
        ($session, $error) = Net::SNMP->session(
            -hostname  => $o_host,
            -version   => 2,
            -community => $o_community,
            -port      => $o_port,
            -timeout   => $o_timeout
        );
    } else {

        # SNMPV1 login
        verb("SNMP v1 login");
        ($session, $error) = Net::SNMP->session(
            -hostname  => $o_host,
            -community => $o_community,
            -port      => $o_port,
            -timeout   => $o_timeout
        );
    }
}
if (!defined($session)) {
    printf("ERROR opening session: %s.\n", $error);
    exit $ERRORS{"UNKNOWN"};
}
$session->max_msg_size(10000);

########### Cisco CSS checks ##############

# Get load table
my $resultat
    = (version->parse(Net::SNMP->VERSION) < 4)
    ? $session->get_table($css_svc_name)
    : $session->get_table(Baseoid => $css_svc_name);

if (!defined($resultat)) {
    printf("ERROR: Name table : %s.\n", $session->error);
    $session->close;
    exit $ERRORS{"UNKNOWN"};
}

# Get name data & index
my (@index, @svcname) = (undef, undef);
my $numsvc = 0;
foreach my $key (keys %$resultat) {
    verb("OID : $key, Desc : $$resultat{$key}");
    $svcname[$numsvc] = $$resultat{$key};
    $key =~ s/$css_svc_name//;
    verb("Found : $svcname[$numsvc]");
    $index[$numsvc++] = $key;
}

# Write file

my $file_name = $o_dir . "/Nagios_css_" . $o_host;
my $file_lock = $file_name . ".lock";

# First, make a lock file
system("touch $file_lock");

# allow scripts to finish reading file
sleep(0.5);

# create the file
if (!open(FILE, "> " . $file_name)) {
    print "Cannot write $file_name\n";
    unlink($file_lock);
    exit $ERRORS{"UNKNOWN"};
}
for (my $i = 0; $i < $numsvc; $i++) {
    my $output = $index[$i] . ":" . $svcname[$i] . "\n";
    print FILE $output;
}
close(FILE);
unlink($file_lock);
print "Found $numsvc services : OK\n";
exit $ERRORS{"OK"};