boostedge_services : checks is there is 3 active & enabled service matching "test" with snmp v2c

checkpoint_verification : checks high availability cluster, with policy "CP_Policy" installed, and warning at 100000 connexions, critical at 200000
CP_Management : checks management station

define service {
   name CP_Management
   service_description CPFW1 management
   check_command check_cpfw1_v3!-sm
}

check_snmp_css_main : get index from the host, services are then checked using check_snmp_css_indexed (snmpv2)
check_snmp_css_indexed : check services indexed by check_snmp_css_main (snmpv2)
check_snmp_css : directly read index & data from the host (snmpv2)

ARG1 : regexp of service(s) to check
ARG2 : warning level for : minimum number of active & alive service , average response time, number of connexions
ARG3 : critical level for : minimum number of active & alive service , average response time, number of connexions
ARG4 : additional arguments if needed.

css_index_file_create : This is a "fake" service, which only creates index file in /tmp. It normally returns the number of services it indexes, or an error if he can't.
css_verif_TEST : checks at least 2 services mathnig TEST are up. Warning if 1, critical if 0. This service uses the index file created by css_index_file_create, and returns UNKNOWN if it can't find it.
css_verif_TEST2 : checks at least 2 services mathnig TEST2 are up. Warning if 1, critical if 0. This service doesn't use an index file.

define service {
   name css_verif_TEST
   check_command check_snmp_css_indexed!"TEST"!1!0
}

define service {
   name css_verif_TEST2
   check_command check_snmp_css!"TEST2"!1!0
}

ironport_env : checks ironport fans RPM > 1500 and temp < 70 deg celcius
nokia_env : checks nokia IP fans and power supply status
cisco_env : checks cisco fans and power supply status

define service {
  name nokia_env
  check_command check_snmp_env_v3!nokia
}

define service {
  name cisco_env
  check_command check_snmp_env_v3!cisco
}

linkproof_nhr : returns
WARNING if one nhr at least is in "no new session" or "inactive" mode.
CRITICAL if all nhr are inactive.

ARG1 : host type (stand,netsc,netsl,as400,cisco,cata,nsc,fg,bc,nokia,hp,lp,hpux)
ARG2 : warning level
ARG3 : critical level
ARG4 : additional arguments if needed.

define service {
   name Linux_load
   check_command check_snmp_load_v1!netsl!4,3,3!8,5,5
}

define service {
   name Cisco_load
   check_command check_snmp_load_v1!cisco!90,80,60!100,100,100
}

check_snmp_int_v1 : using snmpv1
check_snmp_int_v3 : using snmpv3

ARG1 : regexp of interface
ARG2 : additional arguments if needed.

define service {
  name check_int_1_6
  check_command check_snmp_int_v1!"FastEthernet-[1-6]"
}

ARG1 : Host type (-N, -I, -E)
ARG2 : warning level(s)
ARG3 : critical level(s)
ARG4 : additional arguments if needed.

define service {
  name Cisco_mem
  check_command check_snmp_mem_v1!-I!80!99
}

ARG1 : Diode name (regexp)
ARG2 : Vhost name (regexp)
ARG3 : Number of diodes and vhost that must be up
ARG4 : additional arguments if needed.

check_service_nsbox : checks using snmpv2
- 6 diodes matching "diode_name" are up
- 3 vhosts matching "vhost_name" are up

ARG1 : regexp of process name
ARG2 : warning level(s)
ARG3 : critical level(s)
ARG4 : additional arguments if needed.

define service {
  name check_crontab
  check_command check_snmp_process!crond!0!0
}

ARG1 : regexp of storage name
ARG2 : warning level
ARG3 : critical level
ARG4 : additional arguments if needed.

define service {
  name Check_LinDisk_home
  service_description Verification /home
  check_command check_snmp_storage_v3!/home!90!97!-r
}

define command {
  name Win_check_swap
  service_description Verification swap Windows
  check_command check_snmp_storage_v3!Virtual!60!90
}

ARG1 : Host type (nokia, alteon, lp, nsc, ipso)
ARG2 : state (master or backup) or number of members, max % assigned to nodes (for ipso).

define service {
  name Linkproof_check_vrrp_master
  check_command check_snmp_vrrp_v3!lp!master
}

define service {
  name check_win_dhcp
  service_description Checks dhcp service is running
  check_command check_win!dhcp
}

define service {
  name check_win_reg_spool
  service_description Checks registery access & print spool is active
  check_command check_win!"au registre",spouleur
}