34 KiB
34 KiB
Manubulon SNMP Plugins
Plugin Overview
| Plugin | Description |
|---|---|
| check_snmp_storage | Storage checks (disks, swap, memory, etc.) |
| check_snmp_int | Interface states, usage on hosts, switches, routers, etc. |
| check_snmp_process | Running processes, their number, used CPU and memory. |
| check_snmp_load | Load/CPU checks |
| check_snmp_mem | Memory and swap usage |
| check_snmp_env | Environmental status of fan, temp, power supplies. |
| check_snmp_vrrp | Interface state of a VRRP cluster |
| check_snmp_cpfw | Checkpoint Firewall-1 status |
| check_snmp_win | Windows services |
| check_snmp_css | CSS service states |
| check_snmp_nsbox | Nsbox VHost and diode status |
| check_snmp_boostedge | Boostedge services |
| check_snmp_linkproof_ndr | Linkproof NHR |
check_snmp_storage
$ ./check_snmp_storage.pl --help
SNMP Disk Monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
(c)2004-2007 Patrick Proy
Usage: check_snmp_storage [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>]) [-p <port>] [-P <protocol>] -m <name in desc_oid> [-q storagetype] -w <warn_level> -c <crit_level> [-t <timeout>] [-T pl|pu|bl|bu ] [-r -s -i -G] [-e] [-S 0|1[,1,<car>]] [-o <octet_length>] [-R <% reserved>]
By default, plugin will monitor %used on drives :
warn if %used > warn and critical if %used > crit
-v, --verbose
print extra debugging information (and lists all storages)
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies SNMP v1)
-2, --v2c
Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-x, --passwd=PASSWD
Password for snmpv3 authentication
-p, --port=PORT
SNMP port (Default 161)
-P, --protocol=PROTOCOL
Network protocol to be used
['udp/ipv4'] : UDP over IPv4
'udp/ipv6' : UDP over IPv6
'tcp/ipv4' : TCP over IPv4
'tcp/ipv6' : TCP over IPv6
-m, --name=NAME
Name in description OID (can be mounpoints '/home' or 'Swap Space'...)
This is treated as a regexp : -m /var will match /var , /var/log, /opt/var ...
Test it before, because there are known bugs (ex : trailling /)
No trailing slash for mountpoints !
-q, --storagetype=[Other|Ram|VirtualMemory|FixedDisk|RemovableDisk|FloppyDisk
CompactDisk|RamDisk|FlashMemory|NetworkDisk]
Also check the storage type in addition of the name
It is possible to use regular expressions ( "FixedDisk|FloppyDisk" )
-r, --noregexp
Do not use regexp to match NAME in description OID
-s, --sum
Add all storages that match NAME (used space and total space)
THEN make the tests.
-i, --index
Parse index table instead of description table to select storage
-e, --exclude
Select all storages except the one(s) selected by -m
No action on storage type selection
-T, --type=TYPE
pl : calculate percent left
pu : calculate percent used (Default)
bl : calculate MegaBytes left
bu : calculate MegaBytes used
-w, --warn=INTEGER
percent / MB of disk used to generate WARNING state
you can add the % sign
-c, --critical=INTEGER
percent / MB of disk used to generate CRITICAL state
you can add the % sign
-R, --reserved=INTEGER
% reserved blocks for superuser
For ext2/3 filesystems, it is 5% by default
-G, --gigabyte
output, warning & critical levels in gigabytes
-f, --perfparse, --perfdata
Performance data output
-S, --short=<type>[,<where>,<cut>]
<type>: Make the output shorter :
0 : only print the global result except the disk in warning or critical
ex: "< 80% : OK"
1 : Don't print all info for every disk
ex : "/ : 66 %used (< 80) : OK"
<where>: (optional) if = 1, put the OK/WARN/CRIT at the beginning
<cut>: take the <n> first caracters or <n> last if n<0
-o, --octetlength=INTEGER
max-size of the SNMP message, usefull in case of Too Long responses.
Be carefull with network filters. Range 484 - 65535, default are
usually 1472,1452,1460 or 1440.
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
Note :
with T=pu or T=bu : OK < warn < crit
with T=pl ot T=bl : crit < warn < OK
If multiple storage are selected, the worse condition will be returned
i.e if one disk is critical, the return is critical
example :
Browse storage list : <script> -C <community> -H <host> -m <anything> -w 1 -c 2 -v
the -m option allows regexp in perl format :
Test drive C,F,G,H,I on Windows : -m ^[CFGHI]:
Test all mounts containing /var : -m /var
Test all mounts under /var : -m ^/var
Test only /var : -m /var -r
Test all swap spaces : -m ^Swap
Test all but swap spaces : -m ^Swap -e
check_snmp_int
$ ./check_snmp_int.pl --help
SNMP Network Interface Monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
GPL license, (c)2004-2007 Patrick Proy
Usage: ./check_snmp_int.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>) [-p <port>] -n <name in desc_oid> [-N -A -i -a -D --down] [-r] [-f[eSyY]] [-k[qBMGu] -g -w<warn levels> -c<crit levels> -d<delta>] [-o <octet_length>] [-t <timeout>] [-s] --label [-V]
-v, --verbose
print extra debugging information (including interface list on the system)
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies v1 protocol)
-l, --login=LOGIN ; -x, --passwd=PASSWD, -2, --v2c
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-2 : use snmp v2c
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-P, --port=PORT
SNMP port (Default 161)
-n, --name=NAME
Name in description OID (eth0, ppp0 ...).
This is treated as a regexp : -n eth will match eth0,eth1,...
Test it before, because there are known bugs (ex : trailling /)
-r, --noregexp
Do not use regexp to match NAME in description OID
-N, --use-ifname
Use IF-MIB::ifName as source for NIC name instead of IF-MIB::ifDescr
-A, --use-ifalias
Use IF-MIB::ifAlias as source for NIC name instead of IF-MIB::ifDescr
-i, --inverse
Make critical when up
-a, --admin
Use administrative status instead of operational
-D, --dormant
Dormant state is an OK state
--down
Down state is an OK state
-o, --octetlength=INTEGER
max-size of the SNMP message, usefull in case of Too Long responses.
Be carefull with network filters. Range 484 - 65535, default are
usually 1472,1452,1460 or 1440.
-f, --perfparse, --perfdata
Performance data output (no output when interface is down).
-W, --weather
Output data for "weathermap" lines in NagVis with performance data
-e, --error
Add error & discard to Perfparse output
-S, --intspeed
Include speed in performance output in bits/s
-y, --perfprct ; -Y, --perfspeed
-y : output performance data in % of max speed
-Y : output performance data in bits/s or Bytes/s (depending on -B)
-k, --perfcheck ; -q, --extperfcheck
-k check the input/ouput bandwidth of the interface
-q also check the error and discard input/output
--label
Add label before speed in output : in=, out=, errors-out=, etc...
-g, --64bits
Use 64 bits counters instead of the standard counters when checking
bandwidth & performance data for interface >= 1Gbps.
You must use snmp v2c or v3 to get 64 bits counters.
-d, --delta=seconds
make an average of <delta> seconds (default 300=5min)
-B, --kbits
Make the warning and critical levels in K|M|G Bits/s instead of K|M|G Bytes/s
-G, --giga ; -M, --mega ; -u, --prct
-G : Make the warning and critical levels in Gbps (with -B) or GBps
-M : Make the warning and critical levels in Mbps (with -B) or MBps
-u : Make the warning and critical levels in % of reported interface speed.
-w, --warning=input,output[,error in,error out,discard in,discard out]
warning level for input / output bandwidth (0 for no warning)
unit depends on B,M,G,u options
warning for error & discard input / output in error/min (need -q)
-c, --critical=input,output[,error in,error out,discard in,discard out]
critical level for input / output bandwidth (0 for no critical)
unit depends on B,M,G,u options
critical for error & discard input / output in error/min (need -q)
-s, --short=int
Make the output shorter : only the first <n> chars of the interface(s)
If the number is negative, then get the <n> LAST caracters.
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
Note : when multiple interface are selected with regexp,
all be must be up (or down with -i) to get an OK result.
check_snmp_process
$ ./check_snmp_process.pl --help
SNMP Process Monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
GPL license, (c)2004-2006 Patrick Proy
Usage: ./check_snmp_process.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd) [-p <port>] [-P <IP Protocol>] -n <name> [-w <min_proc>[,<max_proc>] -c <min_proc>[,max_proc] ] [-m<warn Mb>,<crit Mb> -a -u<warn %>,<crit%> -d<delta> ] [-t <timeout>] [-o <octet_length>] [-f -A -F ] [-r] [-V] [-g]
-v, --verbose
print extra debugging information (and lists all storages)
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies SNMP v1 or v2c with option)
-l, --login=LOGIN ; -x, --passwd=PASSWD, -2, --v2c
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-2 : use snmp v2c
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-p, --port=PORT
SNMP port (Default 161)
-P, --protocol=PROTOCOL
Network protocol to be used
['udp/ipv4'] : UDP over IPv4
'udp/ipv6' : UDP over IPv6
'tcp/ipv4' : TCP over IPv4
'tcp/ipv6' : TCP over IPv6
-n, --name=NAME
Name of the process (regexp)
No trailing slash !
-r, --noregexp
Do not use regexp to match NAME in description OID
-f, --fullpath
Use full path name instead of process name
(Windows doesn't provide full path name)
-A, --param
Add parameters to select processes.
ex : "named.*-t /var/named/chroot" will only select named process with this parameter
-F, --perfout
Add performance output
outputs : memory_usage, num_process, cpu_usage
-w, --warn=MIN[,MAX]
Number of process that will cause a warning
-1 for no warning, MAX must be >0. Ex : -w-1,50
-c, --critical=MIN[,MAX]
number of process that will cause an error (
-1 for no critical, MAX must be >0. Ex : -c-1,50
Notes on warning and critical :
with the following options : -w m1,x1 -c m2,x2
you must have : m2 <= m1 < x1 <= x2
you can omit x1 or x2 or both
-m, --memory=WARN,CRIT
checks memory usage (default max of all process)
values are warning and critical values in Mb
-a, --average
makes an average of memory used by process instead of max
-u, --cpu=WARN,CRIT
checks cpu usage of all process
values are warning and critical values in % of CPU usage
if more than one CPU, value can be > 100% : 100%=1 CPU
-d, --delta=seconds
make an average of <delta> seconds for CPU (default 300=5min)
-g, --getall
In some cases, it is necessary to get all data at once because
process die very frequently.
This option eats bandwidth an cpu (for remote host) at breakfast.
-o, --octetlength=INTEGER
max-size of the SNMP message, usefull in case of Too Long responses.
Be carefull with network filters. Range 484 - 65535, default are
usually 1472,1452,1460 or 1440.
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
Note :
CPU usage is in % of one cpu, so maximum can be 100% * number of CPU
example :
Browse process list : <script> -C <community> -H <host> -n <anything> -v
the -n option allows regexp in perl format :
All process of /opt/soft/bin : -n /opt/soft/bin/ -f
All 'named' process : -n named
check_snmp_load
$ ./check_snmp_load.pl --help
SNMP Load & CPU Monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
GPL license, (c)2004-2007 Patrick Proy
Usage: ./check_snmp_load.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>]) [-p <port>] [-P <protocol>] -w <warn level> -c <crit level> -T=[stand|netsl|netsc|as400|cisco|cata|cisg|nsc|fg|bc|nokia|hp|lp|hpux] [-f] [-t <timeout>] [-V]
-v, --verbose
print extra debugging information
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies v1 protocol)
-2, --v2c
Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-p, --port=PORT
SNMP port (Default 161)
-P, --protocol=PROTOCOL
Network protocol to be used
['udp/ipv4'] : UDP over IPv4
'udp/ipv6' : UDP over IPv6
'tcp/ipv4' : TCP over IPv4
'tcp/ipv6' : TCP over IPv6
Network protocol (Default udp/ipv4)
-w, --warn=INTEGER | INT,INT,INT
1 value check : warning level for cpu in percent (on one minute)
3 value check : comma separated level for load or cpu for 1min, 5min, 15min
-c, --crit=INTEGER | INT,INT,INT
critical level for cpu in percent (on one minute)
1 value check : critical level for cpu in percent (on one minute)
3 value check : comma separated level for load or cpu for 1min, 5min, 15min
-T, --type=stand|netsl|netsc|as400|cisco|cisg|bc|nokia|hp|lp
CPU check :
stand : standard MIBII (works with Windows),
can handle multiple CPU.
netsl : linux load provided by Net SNMP (1,5 & 15 minutes values)
netsc : cpu usage given by net-snmp (100-idle)
as400 : as400 CPU usage
cisco : Cisco CPU usage
n5k : Cisco Nexus CPU Usage
cata : Cisco catalyst CPU usage
cisg : Cisco small business (SG500) CPU usage (1,5 & 15 minutes values)
nsc : NetScreen CPU usage
fg : Fortigate CPU usage
bc : Bluecoat CPU usage
nokia : Nokia CPU usage
hp : HP procurve switch CPU usage
lp : Linkproof CPU usage
hpux : HP-UX load (1,5 & 15 minutes values)
-f, --perfparse, --perfdata
Performance data output
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
check_snmp_mem
$ ./check_snmp_load.pl --help
SNMP Load & CPU Monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
GPL license, (c)2004-2007 Patrick Proy
Usage: ./check_snmp_load.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>]) [-p <port>] [-P <protocol>] -w <warn level> -c <crit level> -T=[stand|netsl|netsc|as400|cisco|cata|cisg|nsc|fg|bc|nokia|hp|lp|hpux] [-f] [-t <timeout>] [-V]
-v, --verbose
print extra debugging information
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies v1 protocol)
-2, --v2c
Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-p, --port=PORT
SNMP port (Default 161)
-P, --protocol=PROTOCOL
Network protocol to be used
['udp/ipv4'] : UDP over IPv4
'udp/ipv6' : UDP over IPv6
'tcp/ipv4' : TCP over IPv4
'tcp/ipv6' : TCP over IPv6
Network protocol (Default udp/ipv4)
-w, --warn=INTEGER | INT,INT,INT
1 value check : warning level for cpu in percent (on one minute)
3 value check : comma separated level for load or cpu for 1min, 5min, 15min
-c, --crit=INTEGER | INT,INT,INT
critical level for cpu in percent (on one minute)
1 value check : critical level for cpu in percent (on one minute)
3 value check : comma separated level for load or cpu for 1min, 5min, 15min
-T, --type=stand|netsl|netsc|as400|cisco|cisg|bc|nokia|hp|lp
CPU check :
stand : standard MIBII (works with Windows),
can handle multiple CPU.
netsl : linux load provided by Net SNMP (1,5 & 15 minutes values)
netsc : cpu usage given by net-snmp (100-idle)
as400 : as400 CPU usage
cisco : Cisco CPU usage
n5k : Cisco Nexus CPU Usage
cata : Cisco catalyst CPU usage
cisg : Cisco small business (SG500) CPU usage (1,5 & 15 minutes values)
nsc : NetScreen CPU usage
fg : Fortigate CPU usage
bc : Bluecoat CPU usage
nokia : Nokia CPU usage
hp : HP procurve switch CPU usage
lp : Linkproof CPU usage
hpux : HP-UX load (1,5 & 15 minutes values)
-f, --perfparse, --perfdata
Performance data output
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
michi@mbmif ~/coding/addons/manubulon-snmp/plugins (master *=) $ ./check_snmp_mem.pl --help
SNMP Memory Monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
GPL license, (c)2004-2007 Patrick Proy
Usage: ./check_snmp_mem.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>]) [-p <port>] [-P <protocol>] -w <warn level> -c <crit level> [-I|-N|-E] [-f] [-m -b] [-t <timeout>] [-V]
-v, --verbose
print extra debugging information
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies SNMP v1 or v2c with option)
-2, --v2c
Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-p, --port=PORT
SNMP port (Default 161)
-P, --protocol=PROTOCOL
Network protocol to be used
['udp/ipv4'] : UDP over IPv4
'udp/ipv6' : UDP over IPv6
'tcp/ipv4' : TCP over IPv4
'tcp/ipv6' : TCP over IPv6
-w, --warn=INTEGER | INT,INT
warning level for memory in percent (0 for no checks)
Default (-N switch) : comma separated level for Real Memory and Swap
-I switch : warning level
-c, --crit=INTEGER | INT,INT
critical level for memory in percent (0 for no checks)
Default (-N switch) : comma separated level for Real Memory and Swap
-I switch : critical level
-N, --netsnmp (default)
check linux memory & swap provided by Net SNMP
-m, --memcache
include cached memory in used memory (only with Net-SNMP)
-b, --membuffer
exclude buffered memory in used memory (only with Net-SNMP)
-I, --cisco
check cisco memory (sum of all memory pools)
-E, --hp
check HP Procurve memory
-f, --perfdata
Performance data output
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
check_snmp_env
$ ./check_snmp_env.pl --help
SNMP environmental Monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
GPL License, (c)2006-2007 Patrick Proy
Usage: ./check_snmp_env.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>]) [-p <port>] -T (cisco|nokia|bc|iron|foundry|linux) [-F <rpm>] [-c <celcius>] [-f] [-t <timeout>] [-V]
-v, --verbose
print extra debugging information
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies v1 protocol)
-2, --v2c
Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-P, --port=PORT
SNMP port (Default 161)
-T, --type=cisco|nokia|bc|iron|foundry
Environemental check :
cisco : All Cisco equipements : voltage,temp,fan,power supply
(will try to check everything in the env mib)
nokia : Nokia IP platforms : fan and power supply
bc : BlueCoat platforms : fans, power supply, voltage, disks
iron : IronPort platforms : fans, power supply, temp
foundry : Foundry Network platforms : power supply, temp
linux : Net-SNMP with LM-SENSORS : temp, fan, volt, misc
-F, --fan=<rpm>
Minimum fan rpm value (only needed for 'iron' & 'linux')
-c, --celcius=<celcius>
Maximum temp in degree celcius (only needed for 'iron' & 'linux')
-f, --perfparse
Perfparse compatible output
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
check_snmp_vrrp
$ ./check_snmp_vrrp.pl --help
SNMP VRRP Monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
GPL license, (c)2004-2007 Patrick Proy
Usage: ./check_snmp_vrrp.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>]) -s <master|backup|num,%> [-T <nokia|alteon|lp|nsc|ipsocluster|foundry>] [-p <port>] [-t <timeout>] [-V]
-v, --verbose
print extra debugging information
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies v1 protocol)
-2, --v2c
Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-P, --port=PORT
SNMP port (Default 161)
-T, --type=<nokia|alteon|lp|nsc|ipso>
Type of vrrp router to check
nokia (default) : Nokia vrrp. Should be working for most vrrp routers
alteon : for Alteon AD4 Loadbalancers
lp : Radware Linkproof
nsc : Nescreen (ScreenOS 5.x NSRP)
ipso : Nokia IPSO clustering
foundry : Foundry VRRP
-s, --state=master|backup|num,%
Nokia ipso clustering : number of members, max % assigned to nodes.
Other : check vrrp interface to be master or backup
-g, --long
Make output long even is all is OK
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
check_snmp_cpfw
$ ./check_snmp_cpfw.pl --help
SNMP Checkpoint FW-1 Monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
GPL License, (c)2004-2007 - Patrick Proy
Usage: ./check_snmp_cpfw.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>]) [-s] [-w [-p=pol_name] [-c=warn,crit]] [-m] [-a [standby] ] [-f] [-p <port>] [-t <timeout>] [-V]
-v, --verbose
print extra debugging information (including interface list on the system)
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies v1 protocol)
2, --v2c
Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-s, --svn
check for svn status
-w, --fw
check for fw status
-a, --ha[=standby]
check for ha status and node in "active" state
If using SecurePlatform and monitoring a standby unit, put "standby" too
-m, --mgmt
check for management status
-p, --policy=POLICY_NAME
check if installed policy is POLICY_NAME (must have -w)
-c, --connexions=WARN,CRIT
check warn and critical number of connexions (must have -w)
-f, --perfparse, --perfdata
performance data output (only works with -c)
-P, --port=PORT
SNMP port (Default 161)
-t, --timeout=INTEGER
timeout for SNMP (Default: Nagios default)
-V, --version
prints version number
check_snmp_win
$ ./check_snmp_win.pl --help
SNMP Windows Monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
GPL license, (c)2004-2007 Patrick Proy
Usage: check_snmp_win [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd) [-p <port>] -n <name>[,<name2] [-T=service] [-r] [-s] [-N=<n>] [-t <timeout>] [-V]
-v, --verbose
print extra debugging information (and lists all services)
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies SNMP v1 or v2c with option)
-2, --v2c
Use snmp v2c
-l, --login=LOGIN
Login for snmpv3 authentication (implies v3 protocol with MD5)
-x, --passwd=PASSWD
Password for snmpv3 authentication
-p, --port=PORT
SNMP port (Default 161)
-T, --type=service
Check type :
- service (default) checks service
-n, --name=NAME[,NAME2...]
Comma separated names of services (perl regular expressions can be used for every one).
By default, it is not case sensitive.
-N, --number=<n>
Compare matching services with <n> instead of the number of names provided.
-s, --showall
Show all services in the output, instead of only the non-active ones.
-r, --noregexp
Do not use regexp to match NAME in service description.
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
Note :
The script will return
OK if ALL services are in active state,
WARNING if there is more than specified (ex 2 service specified, 3 active services matching),
CRITICAL if at least one of them is non active.
The -n option will allows regexp in perl format
-n "service" will match 'service WINS' 'sevice DNS' etc...
It is not case sensitive by default : WINS = wins
check_snmp_css
$ ./check_snmp_css.pl --help
SNMP Cisco CSS monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
(c)2004-2006 Patrick Proy
Usage: ./check_snmp_css.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>]) -n <name> [-d directory] [-w <num>,<resp>,<conn> -c <num>,<resp>,<conn>] [-p <port>] [-f] [-t <timeout>] [-V]
-v, --verbose
print extra debugging information
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-n, --name=<name>
regexp to select service
-w, --warning=<num>,<resp>,<conn>
Optional. Warning level for
- minimum number of active & alive service
- average response time
- number of connexions
For no warnings, put -1 (ex : -w5,-1,3).
When using negative numbers, dont put space after "-w"
-d, --dir=<directory to put file>
Directory where the temp file with index, created by check_snmp_css_main.pl, can be found
If no directory is set, /tmp will be used
-c, --critical=<num>,resp>,<conn>
Optional. Critical levels (-1 for no critical levels)
See warning levels.
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies v1 protocol)
-2, --v2c
Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-P, --port=PORT
SNMP port (Default 161)
-f, --perfparse
Perfparse compatible output
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
check_snmp_nsbox
$ ./check_snmp_nsbox.pl --help
SNMP NetSecureOne Netbox monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
(c)2004-2006 Patrick Proy
Usage: ./check_snmp_nsbox.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>]) -d <diode> -s <vhost> -n <ndiode>,<nvhost> [-p <port>] [-f] [-t <timeout>] [-V]
Check that diode and vhost selected by regexp are active.
-v, --verbose
print extra debugging information
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies v1 protocol)
-2, --v2c
Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-d, --diode=<diode>
Diode selection by regexp
-s, --vhost=<vhost>
Vhost selection by regexp
-n, --number=<ndiode>,<nvhost>
number of diode and vhost that must be up.
-P, --port=PORT
SNMP port (Default 161)
-f, --perfparse, --perfdata
Performance data output
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
check_snmp_boostedge
$ ./check_snmp_boostedge.pl --help
SNMP Boostedge service monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
GPL License, (c)2006-2007 Patrick Proy
Usage: ./check_snmp_boostedge.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>]) -s <service> -n <number> [-p <port>] [-f] [-t <timeout>] [-V]
-v, --verbose
print extra debugging information
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies v1 protocol)
-s, --service=<service>
Regexp of service to select
-n, --number=<number>
Number of services selected that must be in running & enabled state
-2, --v2c
Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-P, --port=PORT
SNMP port (Default 161)
-f, --perfparse, --perfdata
Performance data output
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number
check_snmp_linkproof_nhr
$ ./check_snmp_linkproof_nhr.pl --help
SNMP Radware Linkproof NHR monitor for Icinga/Nagios/Naemon/Shinken, Version 2.1.0
(c)2004-2006 Patrick Proy
Usage: ./check_snmp_linkproof_nhr.pl [-v] -H <host> -C <snmp_community> [-2] | (-l login -x passwd [-X pass -L <authp>,<privp>]) [-p <port>] [-f] [-t <timeout>] [-V]
The plugin will test all nhr configured and will return
OK if all nhr are active
WARNING if one nhr at least is in "no new session" or "inactive" mode.
CRITICAL if all nhr are inactive.
-v, --verbose
print extra debugging information
-h, --help
print this help message
-H, --hostname=HOST
name or IP address of host to check
-C, --community=COMMUNITY NAME
community name for the host's SNMP agent (implies v1 protocol)
-2, --v2c
Use snmp v2c
-l, --login=LOGIN ; -x, --passwd=PASSWD
Login and auth password for snmpv3 authentication
If no priv password exists, implies AuthNoPriv
-X, --privpass=PASSWD
Priv password for snmpv3 (AuthPriv protocol)
-L, --protocols=<authproto>,<privproto>
<authproto> : Authentication protocol (md5|sha : default md5)
<privproto> : Priv protocole (des|aes : default des)
-P, --port=PORT
SNMP port (Default 161)
-f, --perfparse, --perfdata
Performance data output
-t, --timeout=INTEGER
timeout for SNMP in seconds (Default: 5)
-V, --version
prints version number