New changelog entry

Update to upstream version '2.3.5'
with Debian dir d7999c706a

debian/.gitlab-ci.yml

@@ -0,0 +1,15 @@
+---
+include:
+  - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/recipes/debian.yml
+
+variables:
+  RELEASE: 'unstable'
+  SALSA_CI_DISABLE_APTLY: 0
+  SALSA_CI_DISABLE_AUTOPKGTEST: 0
+  SALSA_CI_DISABLE_BLHC: 1
+  SALSA_CI_DISABLE_LINTIAN: 0
+  SALSA_CI_DISABLE_PIUPARTS: 0
+  SALSA_CI_DISABLE_REPROTEST: 0
+  SALSA_CI_DISABLE_BUILD_PACKAGE_ALL: 0
+  SALSA_CI_DISABLE_BUILD_PACKAGE_ANY: 0
+  SALSA_CI_ENABLE_BUILD_PACKAGE_TWICE: 1

debian/NEWS

@@ -0,0 +1,102 @@
+monitoring-plugins (2.1.2-3) unstable; urgency=medium
+
+  We switched again over to another radius library. This time radcli
+  to fix #822337. This makes it again necessary to migrate you radius
+  credentials from /etc/radiusclient/servers to /etc/radcli/servers
+  in case you are using check_radius.
+  Please install the new dependencies in this case if you don't install
+  Recommends by default. Those dependencies can be found in
+  /usr/share/doc/monitoring-plugins-standard/README.Debian.plugins.
+
+ -- Jan Wagner <waja@cyconet.org>  Wed, 02 Nov 2016 23:59:10 +0100
+
+monitoring-plugins (2.0-1) unstable; urgency=medium
+
+  This software project was renamed by upstream. For more information
+  see https://www.monitoring-plugins.org/news/new-project-name.html.
+
+  We renamed the package(s) also, but we kept the directories
+  /etc/nagios-plugins/ and /usr/lib/nagios/plugins for now, cause
+  many other packages rely on them. Maybe we have to change that later.
+
+  We decided to set capabilities(7) for check_icmp and check_dhcp, when
+  possible. This means libcap2-bin needs to be installed and the
+  kernel (in our case this is linux) needs to support that. This
+  makes it possible to avoid suid bit set for those plugins.
+
+  We even switched over to freeradius-client to fix #721621. This makes
+  it necessary to migrate you radius credentials from
+  /etc/radiusclient-ng/servers to /etc/radiusclient/servers in case you
+  are using check_radius.
+
+  check_snmp is now evaluating negative values properly, but it might be
+  returning CRITICALs where it used to return OK and was ignored, if a
+  negative value turns out to actually be a valid value.
+  If negative values are valid, this can be worked around, by adding "~:"
+  to the warning/critical threshold : 100 -> ~:100
+
+ -- Jan Wagner <waja@cyconet.org>  Mon, 23 Jun 2014 08:34:45 +0200
+
+nagios-plugins (1.4.15-6) unstable; urgency=low
+
+  Created a nagios-plugins-common package which ships files possibly needed
+  also by other plugin packages and should installed as dependency
+
+  Removed check_bgpstate and check_linux_raid, which are shiped in upstream
+  contrib/ and are not maintained there anymore. If you need a replacement
+  for check_linux_raid, have a look into check_raid from
+  nagios-plugins-contrib package.
+
+ -- Jan Wagner <waja@cyconet.org>  Tue, 15 May 2012 13:41:33 +0200
+
+nagios-plugins (1.4.15-4) unstable; urgency=low
+
+  Moved linked libraries against nagios-plugins-standard from Depends to
+  Recommends and mention them in
+  /usr/share/doc/nagios-plugins-standard/README.Debian.plugins.
+
+ -- Jan Wagner <waja@cyconet.org>  Sun, 13 Feb 2011 22:51:54 +0100
+
+nagios-plugins (1.4.14-2) unstable; urgency=low
+
+  Moved check_mailq to nagios-plugins-standard, because it requires the mailq
+  binary and it is shipped with postfix, exim, sendmail and qmail, which is
+  the plugin is intended to check.
+
+ -- Jan Wagner <waja@cyconet.org>  Thu, 11 Mar 2010 13:24:23 +0100
+
+nagios-plugins (1.4.14-1) unstable; urgency=low
+
+  If your are using check_linux_raid.pl or check_bgpstate (respectively the
+  check_snmp_bgpstate), they will be removed sometime in the future, as
+  upstream will remove they shortly ... so be prepared!
+
+  The qstat package is not a dependency any more but recommanded. As Recommands
+  installed by default these days, there shouldn't much users effected. If you
+  have turned off the installation of recommanded packages and you are using
+  check_quake, please install the qstat package again.
+
+  For all non linux archs, we depend on inetutils-ping, since now. As actually
+  inetutils-ping doesn't support a deadlines option (see #565137), it will be
+  likely, that you will get plugin timeouts from check_ping. As iputils-ping
+  is not an option here, due it's not available, you have to deal with that.
+  The suggestion would be in this case, to migrate over to check_icmp.
+
+ -- Jan Wagner <waja@cyconet.org>  Sun, 20 Dec 2009 20:01:07 +0100
+
+nagios-plugins (1.4.12-1) unstable; urgency=low
+
+  Removed default port of check_radius definition in favor of the ability to
+  specify it as 4th argument.
+
+ -- Jan Wagner <waja@cyconet.org>  Fri, 06 Jun 2008 12:25:59 +0200
+
+nagios-plugins (1.4.5-3) unstable; urgency=low
+
+  ifstatus.cfg has changed. Now you have to provide a community in the first
+  argument ($ARG1$). Description and IfIndex moved to second argument ($ARG2$).
+
+  E.g.: use "check_ifstatus!public" instead of "check_ifstatus" as
+  check_command!
+
+ -- Jan Wagner <waja@cyconet.org>  Thu, 11 Jan 2007 14:56:47 +0100

debian/README.Debian

@@ -0,0 +1,95 @@
+================================================================================
+monitoring-plugins for Debian
+================================================================================
+
+below is a collection of various bits of information that might be
+helpful to users of monitoring-plugins in debian.
+
+================================================================================
+plugins and dependencies
+================================================================================
+
+some plugins require additional libraries and programs. to prevent you from
+having to install dozens of further packages that you don't actually need,
+there is no strict dependency on some of them.
+see /usr/share/doc/monitoring-plugins-standard/README.Debian.plugins for details.
+
+================================================================================
+how to use plugins
+================================================================================
+
+- you can invoke the plugins with "--help" to get help how to use the plugins
+- a short usage can be usually obtained by just running the check without
+  arguments
+- if you need more information, how to use plugins, have a look at:
+  http://www.monitoring-plugins.org/doc/faq/index.html
+
+================================================================================
+predefined / shipped check commands
+================================================================================
+
+we are shipping predefined checks, to make users life easier. at the first look,
+this seems really nice. providing checks for every special case (see check_http)
+may end up in a unsupportable state of our package.
+for example one check is testing a service on a special port, where we provide
+a check command. after some time, this service changes its port after some time,
+cause the developers of this software decided for any reason to do so. changing
+the port in the existing check will break installations, which are using the
+service with the old behavior. new users will getting confused of not using the
+correct port for their shiny service.
+cause of this conflict, we try to provide flexible checks, which may look
+complicated at first, but giving the user more power.
+
+a good example for using such a general approach is check_nt / check_nscp. some
+3rd party sources (guessing they can traced back to one) are suggesting using
+two args in some way like:
+
+define command {
+command_name	check_nt
+command_line	$USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
+}
+
+beside specifying not the port, we are not using "$ARG2$", cause all arguments
+of "$ARG2$" can just be used in "$ARG1$" without any problem.
+this gives you the possibility to use every check in your service definition,
+without the problem about changes in your environment. you can easily change
+your service definition as soon your environment changes without breaking the
+command definition.
+
+================================================================================
+different plugin packages and how to avoid installing massive dependencies
+================================================================================
+
+if you're frustrated by all the crap being brought in by monitoring-plugins (for
+example if you're installing nrpe or nsca on a remote host), try the
+monitoring-plugins-basic package.
+
+================================================================================
+plugins needing root privilege or capabilities(7) set
+================================================================================
+
+the check_dhcp, check_icmp and maybe others plugins require root privileges or
+capabilities(7) to run, because of the low-level packet mangling that they
+perform. but, in the interest of the "safe default", these plugins will not
+be installed with the suid bit set.
+if setcap is able set the necessary capabilities, you are fine. if the setcap
+binary is not installed or not able to set the capabilities, you need to
+either set the capabilities (eg. cap_net_raw+ep) for your own or provide root
+privileges. You could go the lazy way and install libcap2-bin and run the
+following afterwards:
+
+# /var/lib/dpkg/info/monitoring-plugins-basic.postinst configure
+
+there are two recommended ways about providing root priviles to your plugins
+on your system:
+
+- set the suid bit with dpkg-statoverride:
+
+# dpkg-statoverride --update --add root nagios 4750 $plugin
+
+where $plugin is the specific plugin you want to grant such privileges.
+
+- use sudo to grant the permissions and modify your plugin config
+
+of these two, the first is recommended because it's the simplest and
+has the same effect as the second.

debian/README.Debian.plugins.in

@@ -0,0 +1,61 @@
+monitoring-plugins on Debian
+============================
+
+Some plugins require additional libraries and programs. To prevent you from
+having to install dozens of further packages that you don't actually need,
+there is no strict dependency on some of them. Rather, they are listed as
+recommendations and suggests.
+
+apt-get(8) and aptitude(8) will install recommended packages automatically by
+default. If you did not disable this feature you will have everything in place
+to operate all plugins when installing the "monitoring-plugins-standard"
+package, beside the packages listed as suggests.
+Else you have to install missing dependencies manually (see the section "Plugin
+dependencies" below).
+
+Plugin dependencies:
+--------------------
+
+check_bgpstate:
+  * libnet-snmp-perl
+  * whois
+
+check_breeze:
+  * snmp
+
+check_disk_smb:
+  * smbclient
+
+check_dns:
+  * dnsutils
+
+check_fping:
+  * fping
+
+check_game:
+  * qstat
+
+check_ifoperstatus:
+  * libnet-snmp-perl
+
+check_ifstatus:
+  * libnet-snmp-perl
+
+check_mailq:
+  * sendmail binary of qmail or one of the following packages
+    - postfix
+    - sendmail-bin
+    - exim4-daemon-heavy
+    - exim4-daemon-light
+  * sudo
+
+check_oracle:
+  * procps
+
+check_rpc:
+  * rpcbind
+
+check_wave:
+  * snmp
+
+@PLUGIN_DEPS@

debian/README.source

@@ -0,0 +1,24 @@
+We use dpatch for patch handling inside our package(s).  Please see
+/usr/share/doc/dpatch/README.source.gz (if you have installed dpatch) for
+documentation about dpatch.
+
+Since Version 1.5.0 we are repackaging the upstream tarball to stop providing:
+
+ * perlmods/
+
+Therefor you should use the script debian/bin/repack.sh:
+
+ repack.sh <upstream-tarball>
+
+ This can also be automatically done with 'uscan --force-download'
+
+Creating a sufficiant tarball from latest git snapshot:
+
+* Install 'autoconf automake' beside the build-depends
+* Following RELEASING[1] you need
+  - cd /tmp/monitoringlug
+  - tools/setup
+  - ./configure
+  - make dist
+
+[1] https://github.com/monitoring-plugins/monitoring-plugins/blob/master/doc/RELEASING

debian/bin/gen_plugin_deps.pl

@@ -0,0 +1,106 @@
+#! /usr/bin/perl
+#
+# collectd - gen_plugin_deps.pl
+# Copyright (C) 2007 Sebastian Harl
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; only version 2 of the License is applicable.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+# Author:
+#   Sebastian Harl <sh at tokkee.org>
+
+use strict;
+use warnings;
+
+# actual not needed
+my $extra_deps = {
+#	sensors => [ 'lm-sensors' ],
+};
+
+my $infile  = "debian/README.Debian.plugins.in";
+my $outfile = "debian/README.Debian.plugins";
+
+my ($ifile, $ofile);
+
+if (! open($ifile, "<", $infile)) {
+	print STDERR "Could not open file '$infile': $!\n";
+	exit 1;
+}
+
+if (! open($ofile, ">", $outfile)) {
+	print STDERR "Could not open file '$outfile': $!\n";
+	exit 1;
+}
+
+while (my $line = <$ifile>) {
+	if ($line !~ m/^\@PLUGIN_DEPS\@\n$/) {
+		print $ofile $line;
+	}
+	else {
+		print_plugin_deps($ofile);
+	}
+}
+
+close($ofile);
+close($ifile);
+
+sub print_plugin_deps
+{
+	my $fh   = shift;
+	my $pdir = undef;
+	my $i    = 0;
+
+	my $plugindir = "debian/monitoring-plugins-standard/usr/lib/nagios/plugins/";
+
+	if (! opendir($pdir, $plugindir)) {
+		print STDERR "Could not open directory '$plugindir': $!\n";
+		exit 1;
+	}
+
+	foreach my $dirent (sort readdir($pdir)) {
+#		if ($dirent !~ m/^(\w+).so$/) {
+		if ($dirent !~ m/^check_(\w+)$/) {
+			next;
+		}
+
+		my $name = $1;
+		my $deps = `dpkg-shlibdeps -O $plugindir/$dirent`;
+
+		chomp $deps;
+
+		$deps =~ s/^shlibs:Depends=//;
+
+		my @deps = grep !m/^libc6\b/, split m/, /, $deps;
+
+		if (scalar @deps) {
+			if (0 < $i) {
+				print $fh "\n";
+			}
+
+			++$i;
+
+			print $fh "check_$name:\n";
+
+			if (defined $extra_deps->{$name}) {
+				unshift @deps, @{$extra_deps->{$name}};
+			}
+
+			foreach my $dep (@deps) {
+				print $fh "  * $dep\n";
+			}
+		}
+	}
+}
+
+# vim: set tw=78 sw=4 ts=4 noexpandtab :
+

debian/bin/repack.sh

@@ -0,0 +1,39 @@
+#!/bin/bash
+# Borrowed from Raphael Geissert's Debian PHP repack script.
+
+set -e
+
+if [ ! -f "$3" ] && [ ! -f "$1" ]; then
+    echo "This script must be run via uscan or by manually specifying the tarball" >&2
+    exit 1
+fi
+
+tarball=
+
+[ -f "$3" ] && tarball="$3"
+[ -z "$tarball" -a -f "$1" ] && tarball="$1"
+
+tarball="$(readlink -f "$tarball")"
+
+tdir="$(mktemp -d)"
+trap '[ ! -d "$tdir" ] || rm -r "$tdir"' EXIT
+
+tar -xzf $tarball -C $tdir
+cp -a "$tarball" "$tarball.orig"
+distdir="$(basename $(ls -d $tdir/*))"
+srcdir="$tdir/$distdir"
+
+#echo "Adjusting $srcdir/configure"
+sed -i 's/perlmods\/Makefile\ //' $srcdir/configure
+sed -i '/perlmods\/Makefile/d' $srcdir/configure
+#echo "Adjusting $srcdir/configure.in"
+[ -f  $srcdir/configure.in ] && sed -i '/perlmods\/Makefile/d' $srcdir/configure.in
+#echo "Adjusting $srcdir/configure.am"
+[ -f  $srcdir/configure.ac ] && sed -i '/perlmods\/Makefile/d' $srcdir/configure.ac
+#echo "Adjusting $srcdir/Makefile*"
+sed -i 's/perlmods\ //' $srcdir/Makefile*
+#echo "Removing $srcdir/perlmods/
+rm -rf $srcdir/perlmods/
+
+tar -cof "${tarball%.*}" -C $tdir/ $distdir
+gzip -f9 "${tarball%.*}"

debian/control

@@ -0,0 +1,112 @@
+Source: monitoring-plugins
+Section: net
+Priority: optional
+Maintainer: Debian Nagios Maintainer Group <pkg-nagios-devel@lists.alioth.debian.org>
+Uploaders: Jan Wagner <waja@cyconet.org>, Alexander Wirt <formorer@debian.org>
+Build-Depends: debhelper-compat (= 13),
+               libcurl4-openssl-dev | libcurl4-nss-dev | libcurl4-gnutls-dev,
+               libdbi-dev,
+               libradcli-dev | libfreeradius-client-dev,
+               libkrb5-dev,
+               libldap2-dev,
+               default-libmysqlclient-dev,
+               libnet-snmp-perl,
+               libpq-dev,
+               libssl-dev,
+               liburiparser-dev,
+               mawk | awk,
+               perl,
+               procps
+Standards-Version: 4.6.2
+Vcs-Browser: https://salsa.debian.org/nagios-team/monitoring-plugins
+Vcs-Git: https://salsa.debian.org/nagios-team/monitoring-plugins.git
+Homepage: https://www.monitoring-plugins.org
+Rules-Requires-Root: binary-targets
+
+Package: monitoring-plugins
+Architecture: all
+Depends: monitoring-plugins-basic, monitoring-plugins-standard, ${misc:Depends}
+Suggests: icinga2, nagios-plugins-contrib
+Provides: nagios-plugins
+Description: Plugins for nagios compatible monitoring systems (metapackage)
+ Plugins for nagios compatible monitoring systems like Naemon and Icinga.
+ .
+ This metapackage will install the entire suite of plugins for nagios
+ compatible monitoring systems.
+ If you are installing monitoring plugins on a remote "satellite" server
+ (using nagios-nrpe-server or nsca), you may be interested in the
+ monitoring-plugins-basic package.
+
+Package: monitoring-plugins-common
+Architecture: any
+Depends: ucf, ${misc:Depends}, ${shlibs:Depends}
+Suggests: icinga2
+Description: Common files for plugins for nagios compatible monitoring
+ Common files for plugins for nagios compatible monitoring systems like Naemon
+ and Icinga.
+ .
+ This package contains common files which maybe needed for plugins.
+
+Package: monitoring-plugins-basic
+Architecture: any
+Depends: inetutils-ping [kfreebsd-any hurd-any],
+         iputils-ping [linux-any],
+         monitoring-plugins-common,
+         procps,
+         ucf,
+         ${misc:Depends},
+         ${shlibs:Depends}
+Recommends: libcap2-bin [linux-any]
+Suggests: icinga2
+Provides: nagios-plugins-basic
+Description: Plugins for nagios compatible monitoring systems (basic)
+ Plugins for nagios compatible monitoring systems like Naemon and Icinga. It
+ contains the following plugins:
+ .
+  check_apt, check_by_ssh, check_clamd, check_cluster,
+  check_dhcp, check_disk, check_dummy, check_file_age,
+  check_ftp, check_host, check_http, check_icmp,
+  check_ide_smart, check_imap, check_ircd, check_jabber,
+  check_load, check_log, check_mrtg, check_mrtgtraf,
+  check_nagios, check_nntp, check_nntps, check_nt,
+  check_ntp, check_ntp_peer, check_ntp_time, check_nwstat,
+  check_overcr,  check_ping, check_pop, check_procs,
+  check_real, check_rta_multi, check_sensors, check_simap,
+  check_smtp, check_spop, check_ssh, check_ssmtp,
+  check_swap, check_tcp, check_time, check_udp,
+  check_ups, check_users
+ .
+ This package provides a basic set of plugins with minimal external
+ dependencies.  It is not likely to be useful by itself unless you are
+ using a remote "satellite" system (using nagios-nrpe-server, check_by_ssh or
+ nsca, for example).
+
+Package: monitoring-plugins-standard
+Architecture: any
+Depends: monitoring-plugins-basic, ucf, ${misc:Depends}, ${shlibs:Depends}
+Recommends: bind9-host | host,
+            dnsutils,
+            libnet-snmp-perl,
+            rpcbind,
+            smbclient,
+            snmp,
+            sudo,
+            ${shlibs:Recommends}
+Suggests: fping,
+          icinga2,
+          postfix | sendmail-bin | exim4-daemon-heavy | exim4-daemon-light,
+          qstat
+Provides: nagios-plugins-standard
+Description: Plugins for nagios compatible monitoring systems (standard)
+ Plugins for nagios compatible monitoring systems like Naemon and Icinga. It
+ contains the following plugins:
+ .
+  check_breeze, check_dbi, check_dig, check_disk_smb, check_dns,
+  check_flexlm, check_fping, check_game, check_hpjd, check_ifoperstatus,
+  check_ifstatus, check_ldap, check_ldaps, check_mailq, check_mysql,
+  check_mysql_query, check_oracle, check_pgsql, check_radius, check_rpc,
+  check_snmp, check_wave
+ .
+ This package provides the suite of plugins that are most likely to be
+ useful on a central monitoring host. Some scripts need more packages installed
+ to work, which is implemented as recommends.

debian/copyright

@@ -0,0 +1,290 @@
+This package was debianized by Guido Trotter <ultrotter@debian.org> on
+Sun,  1 Feb 2004 10:05:51 +0100.
+
+It was downloaded from https://www.monitoring-plugins.org/
+
+Upstream Authors:	Felipe Gustavo de Almeida
+			Ian Cass
+			Robert Dale
+			Karl DeBisschop
+			Ragnar Hojland Espinosa
+			Ethan Galstad
+			Bo Kersey
+			Pedro Leite
+			Richard Mayhew
+			Remi Paulmier
+			Didi Rieder
+			Tom Shields
+			Sean Finney
+			Jeremy T Bouse
+			Peter Bray
+			Gavin Carr
+			Matthias Eble
+			Subhendu Ghosh
+			Thomas Guyot-Sionnest
+			Stanley Hopcroft
+			Matthew Kent
+			Harper Mann
+			Benoit Mortier
+			Sven Nierlein
+			Nathan Vonnahme
+			Ton Voon
+			Holger Weiss
+			Michael Wirtgen
+
+Copyright:
+
+Copyright (C) 1985, 2013 Free Software Foundation, Inc.
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This package is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+ On Debian systems, the complete text of the GNU General
+ Public License version 3 can be found in "/usr/share/common-licenses/GPL-3".
+
+From upstream README:
+
+    You can redistribute and/or modify this software under the terms of the GNU
+    General Public License as published by the Free Software Foundation; either
+    version 3 of the License, or (at your option) any later version; with the
+    additional exemption that compiling, linking, and/or using OpenSSL is
+    allowed.
+
+    This software is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+    FITNESS FOR A PARTICULAR PURPOSE.
+
+Files with different Licenses:
+
+	build-aux/config.guess
+	build-aux/config.sub
+	build-aux/ltmain.sh
+	plugins-scripts/check_mailq.pl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+    USA.
+
+	gl/alloca.in.h
+	gl/as*
+	gl/base64*
+	gl/basename.c
+	gl/cloexec.c
+	gl/config.charset
+	gl/creat-safer.c
+	gl/c-strtod.c
+	gl/d*
+	gl/e*
+	gl/fcntl*
+	gl/fd-safer.c
+	gl/float.*
+	gl/float
+	gl/floorf.c
+	gl/fsusage*
+	gl/full*
+	gl/gai_strerror.c
+	gl/getaddrinfo*
+	gl/gethostname.c
+	gl/getloadavg.c
+	gl/getopt*
+	gl/gettext.h
+	gl/inet_ntop*
+	gl/intprops.h
+	gl/localcharset*
+	gl/malloc.c
+	gl/math.in.h
+	gl/mountlist*
+	gl/netinet_in.in.h
+	gl/printf-*
+	gl/ref-*
+	gl/safe-*
+	gl/size_max.h
+	gl/snprintf.c
+	gl/stdbool.in.h
+	gl/stdint.in.h
+	gl/stdio.in.h
+	gl/stdlib.in.h
+	gl/strerror.c
+	gl/string.in.h
+	gl/stripslash.c
+	gl/strndup.c
+	gl/strnlen.c
+	gl/sys_socket.in.h
+	gl/unistd.in.h
+	gl/v*
+	gl/wchar.in.h
+	gl/wctype.in.h
+	gl/xalloc.h
+	gl/xalloc-die.c
+	gl/xmalloc.c
+	gl/xsize.h
+	gl/xstrndup*
+	gl/xsize.h
+
+    This program is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published
+    by the Free Software Foundation; either version 3, or (at your option)
+    any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    General Public License for more details.
+
+    You should have received a copy of the GNU General Public
+    License along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+    USA.
+
+	gl/reg*
+	gl/mktime.c
+
+    The GNU C Library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU General Public
+    License as published by the Free Software Foundation; either
+    version 3 of the License, or (at your option) any later version.
+
+    The GNU C Library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    General Public License for more details.
+
+    You should have received a copy of the GNU General Public
+    License along with the GNU C Library; if not, see
+    <http://www.gnu.org/licenses/>.
+
+	Makefile.in
+	gl/Makefile.in
+	gl/m4/*.m4
+	lib/Makefile.in
+	lib/tests/Makefile.in
+	plugins/Makefile.in
+	plugins-root/Makefile.in
+	plugins-scripts/Makefile.in
+	tap/Makefile.in
+
+    This Makefile.in is free software; the Free Software Foundation
+    gives unlimited permission to copy and/or distribute it,
+    with or without modifications, as long as this notice is preserved.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+    even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+    PARTICULAR PURPOSE.
+
+	aclocal.m4
+
+    This file is free software; the Free Software Foundation
+    gives unlimited permission to copy and/or distribute it,
+    with or without modifications, as long as this notice is preserved.
+
+	gl/m4/00gnulib.m4
+	gl/m4/a*.m4
+	gl/m4/b*.m4
+	gl/m4/c*.m4
+	gl/m4/d*.m4
+	gl/m4/e*.m4
+	gl/m4/f*.m4
+	gl/m4/getaddrinfo.m4
+	gl/m4/gethostname.m4
+	gl/m4/getloadavg.m4
+	gl/m4/getopt.m4
+	gl/m4/gettext.m4
+	gl/m4/glibc21.m4
+	gl/m4/gnulib-common.m4
+	gl/m4/h*.m4
+	gl/m4/i*.m4
+	gl/m4/l*.m4
+	gl/m4/m*.m4
+	gl/m4/n*.m4
+	gl/m4/off_t.m4
+	gl/m4/p*.m4
+	gl/m4/r*.m4
+	gl/m4/s*.m4
+	gl/m4/t*.m4
+	gl/m4/u*.m4
+	gl/m4/v*.m4
+	gl/m4/w*.m4
+	gl/m4/x*.m4
+	m4/np_mysqlclient.m4
+
+    This file is free software; the Free Software Foundation
+    gives unlimited permission to copy and/or distribute it,
+    with or without modifications, as long as this notice is preserved.
+
+        build-aux/install-sh
+
+    Copyright (C) 1994 X Consortium
+
+    Permission is hereby granted, free of charge, to any person obtaining a copy
+    of this software and associated documentation files (the "Software"), to
+    deal in the Software without restriction, including without limitation the
+    rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+    sell copies of the Software, and to permit persons to whom the Software is
+    furnished to do so, subject to the following conditions:
+
+    The above copyright notice and this permission notice shall be included in
+    all copies or substantial portions of the Software.
+
+    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+    X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+    AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+    TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+    Except as contained in this notice, the name of the X Consortium shall not
+    be used in advertising or otherwise to promote the sale, use or other deal-
+    ings in this Software without prior written authorization from the X Consor-
+    tium.
+
+    FSF changes to this file are in the public domain.
+
+	tap/tap.*
+
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+    1. Redistributions of source code must retain the above copyright
+       notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+       notice, this list of conditions and the following disclaimer in the
+       documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+    ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+    ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+    FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+    DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+    OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+    HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+    LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+    OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+    SUCH DAMAGE.
+
+On Debian systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL'.

debian/dirs

@@ -0,0 +1 @@
+etc/nagios-plugins/config

debian/functions

@@ -0,0 +1,14 @@
+# functions for use by nagios plugins maintainer scripts
+
+npconfdir=/etc/nagios-plugins/config
+
+# we now register all n-p config files via ucf.
+register_cfgs(){
+		# do this in a subshell so we don't screw up cwd
+		( 
+			for file in ${templdir}/*cfg; do
+				ucf ${templdir}/$(basename $file) ${npconfdir}/$(basename $file)
+			done 
+		);
+}
+

debian/gbp.conf

@@ -0,0 +1,3 @@
+[buildpackage]
+postbuild = lintian --info --display-info --display-experimental --pedantic --show-overrides $GBP_CHANGES_FILE
+pbuilder-options = --source-only-changes

debian/monitoring-plugins-basic.dirs

@@ -0,0 +1,3 @@
+etc/nagios-plugins/config
+usr/lib/nagios/plugins
+usr/share/monitoring-plugins/templates-basic

debian/monitoring-plugins-basic.links

@@ -0,0 +1,7 @@
+usr/share/doc/monitoring-plugins-common/NEWS.Debian.gz usr/share/doc/monitoring-plugins-basic/NEWS.Debian.gz
+usr/share/doc/monitoring-plugins-common/NEWS.gz usr/share/doc/monitoring-plugins-basic/NEWS.gz
+usr/share/doc/monitoring-plugins-common/README usr/share/doc/monitoring-plugins-basic/README
+usr/share/doc/monitoring-plugins-common/README.Debian.gz usr/share/doc/monitoring-plugins-basic/README.Debian.gz
+usr/share/doc/monitoring-plugins-common/REQUIREMENTS usr/share/doc/monitoring-plugins-basic/REQUIREMENTS
+usr/share/doc/monitoring-plugins-common/SUPPORT usr/share/doc/monitoring-plugins-basic/SUPPORT
+usr/share/doc/monitoring-plugins-common/changelog.gz usr/share/doc/monitoring-plugins-basic/changelog.gz

debian/monitoring-plugins-basic.postinst

@@ -0,0 +1,29 @@
+#!/bin/sh
+
+set -e
+
+templdir=/usr/share/monitoring-plugins/templates-basic
+. /usr/share/monitoring-plugins/dpkg/functions
+plugindir=/usr/lib/nagios/plugins/
+
+if [ "$1" = "configure" ]; then
+	register_cfgs $2
+
+	# If we have setcap is installed, try setting cap_net_raw+ep,
+	# which allows us to make our binaries working without the
+        # setuid bit
+	if command -v setcap > /dev/null; then
+		if setcap "cap_net_raw+ep" ${plugindir}/check_icmp "cap_net_bind_service=+ep cap_net_raw=+ep" ${plugindir}/check_dhcp; then
+			echo "Setcap for check_icmp and check_dhcp worked!"
+		else
+			echo "Setcap for check_icmp and check_dhcp failed." >&2
+			echo "Please refer README.Debian.gz for using plugins needing" >&2
+			echo "higher privileges!" >&2
+		fi
+	else
+		echo "Setcap is not installed, please refer README.Debian.gz for using" >&2
+		echo "plugins needing higher privileges!" >&2
+	fi
+fi
+
+#DEBHELPER#

debian/monitoring-plugins-basic.postrm.in

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+set -e
+
+BASIC_PLUGINS="@BASIC_PLUGINS@"
+
+if [ "$1" = "purge" ]; then
+	if which ucf >/dev/null 2>&1; then
+		have_ucf="yes"
+	fi
+	for f in $BASIC_PLUGINS; do
+		rm -f /etc/nagios-plugins/config/${f}.cfg
+		if [ "$have_ucf" = "yes" ]; then
+			ucf --purge /etc/nagios-plugins/config/${f}.cfg
+		fi
+	done 
+fi
+
+#DEBHELPER#

debian/monitoring-plugins-common.dirs

@@ -0,0 +1 @@
+usr/lib/nagios/plugins

debian/monitoring-plugins-common.docs

@@ -0,0 +1,7 @@
+FAQ
+NEWS
+README
+REQUIREMENTS
+SUPPORT
+debian/NEWS
+debian/README.Debian

debian/monitoring-plugins-common.examples

@@ -0,0 +1 @@
+

debian/monitoring-plugins-standard.dirs

@@ -0,0 +1,3 @@
+etc/nagios-plugins/config
+usr/lib/nagios/plugins
+usr/share/monitoring-plugins/templates-standard

debian/monitoring-plugins-standard.docs

@@ -0,0 +1 @@
+debian/README.Debian.plugins

debian/monitoring-plugins-standard.links

@@ -0,0 +1,8 @@
+usr/share/doc/monitoring-plugins-common/FAQ usr/share/doc/monitoring-plugins-standard/FAQ
+usr/share/doc/monitoring-plugins-common/NEWS.Debian.gz usr/share/doc/monitoring-plugins-standard/NEWS.Debian.gz
+usr/share/doc/monitoring-plugins-common/NEWS.gz usr/share/doc/monitoring-plugins-standard/NEWS.gz
+usr/share/doc/monitoring-plugins-common/README usr/share/doc/monitoring-plugins-standard/README
+usr/share/doc/monitoring-plugins-common/README.Debian.gz usr/share/doc/monitoring-plugins-standard/README.Debian.gz
+usr/share/doc/monitoring-plugins-common/REQUIREMENTS usr/share/doc/monitoring-plugins-standard/REQUIREMENTS
+usr/share/doc/monitoring-plugins-common/SUPPORT usr/share/doc/monitoring-plugins-standard/SUPPORT
+usr/share/doc/monitoring-plugins-common/changelog.gz usr/share/doc/monitoring-plugins-standard/changelog.gz

debian/monitoring-plugins-standard.postinst

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+set -e
+
+. /usr/share/monitoring-plugins/dpkg/functions
+templdir=/usr/share/monitoring-plugins/templates-standard
+
+if [ "$1" = "configure" ]; then
+	register_cfgs $2
+fi
+
+#DEBHELPER#

debian/monitoring-plugins-standard.postrm.in

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+set -e
+
+STD_PLUGINS="@STD_PLUGINS@"
+
+if [ "$1" = "purge" ]; then
+	if which ucf >/dev/null 2>&1; then
+		have_ucf="yes"
+	fi
+	for f in $STD_PLUGINS; do
+		rm -f /etc/nagios-plugins/config/${f}.cfg
+		if [ "$have_ucf" = "yes" ]; then
+			ucf --purge /etc/nagios-plugins/config/${f}.cfg
+		fi
+	done 
+fi
+
+#DEBHELPER#

debian/monitoring-plugins.links

@@ -0,0 +1,9 @@
+usr/share/doc/monitoring-plugins-common/FAQ usr/share/doc/monitoring-plugins/FAQ
+usr/share/doc/monitoring-plugins-common/NEWS.Debian.gz usr/share/doc/monitoring-plugins/NEWS.Debian.gz
+usr/share/doc/monitoring-plugins-common/NEWS.gz usr/share/doc/monitoring-plugins/NEWS.gz
+usr/share/doc/monitoring-plugins-common/README usr/share/doc/monitoring-plugins/README
+usr/share/doc/monitoring-plugins-common/README.Debian.gz usr/share/doc/monitoring-plugins/README.Debian.gz
+usr/share/doc/monitoring-plugins-common/REQUIREMENTS usr/share/doc/monitoring-plugins/REQUIREMENTS
+usr/share/doc/monitoring-plugins-common/SUPPORT usr/share/doc/monitoring-plugins/SUPPORT
+usr/share/doc/monitoring-plugins-common/changelog.gz usr/share/doc/monitoring-plugins/changelog.gz
+usr/share/doc/monitoring-plugins-standard/README.Debian.plugins usr/share/doc/monitoring-plugins/README.Debian.plugins

debian/patches/02_check_icmp_links

@@ -0,0 +1,30 @@
+## 02_check_icmp_links by Jan Wagner <waja@cyconet.org>
+##
+## DP: Create symlinks for check_icmp to provide default values for some situations
+
+diff -urNad nagios-plugins-1.4.14~/plugins-root/Makefile.am nagios-plugins-1.4.14/plugins-root/Makefile.am
+--- nagios-plugins-1.4.14~/plugins-root/Makefile.am	2008-11-30 22:23:18.000000000 +0100
++++ nagios-plugins-1.4.14/plugins-root/Makefile.am	2010-01-10 20:39:03.000000000 +0100
+@@ -71,7 +71,8 @@
+ 	else \
+ 	  echo "WARNING: insufficient access; not installing setuid plugins"; \
+ 	  echo "NOTE: to install setuid plugins, run 'make install-root' as root"; \
+-	fi
++	fi ; \
++	if [ -x $(DESTDIR)$(libexecdir)/check_icmp ] ; then rm -f $(DESTDIR)$(libexecdir)/check_host $(DESTDIR)$(libexecdir)/check_rta_multi ; ln -s check_icmp $(DESTDIR)$(libexecdir)/check_host ; ln -s check_icmp $(DESTDIR)$(libexecdir)/check_rta_multi ; fi
+ 
+ # /* Author Coreutils team sub-citation */
+ 
+diff -urNad nagios-plugins-1.4.14~/plugins-root/Makefile.in nagios-plugins-1.4.14/plugins-root/Makefile.in
+--- nagios-plugins-1.4.14~/plugins-root/Makefile.in	2009-09-16 10:37:59.000000000 +0200
++++ nagios-plugins-1.4.14/plugins-root/Makefile.in	2010-01-10 20:39:13.000000000 +0100
+@@ -1162,7 +1162,8 @@
+ 	else \
+ 	  echo "WARNING: insufficient access; not installing setuid plugins"; \
+ 	  echo "NOTE: to install setuid plugins, run 'make install-root' as root"; \
+-	fi
++	fi ; \
++	if [ -x $(DESTDIR)$(libexecdir)/check_icmp ] ; then rm -f $(DESTDIR)$(libexecdir)/check_host $(DESTDIR)$(libexecdir)/check_rta_multi ; ln -s check_icmp $(DESTDIR)$(libexecdir)/check_host ; ln -s check_icmp $(DESTDIR)$(libexecdir)/check_rta_multi ; fi
+ 
+ clean-local:
+ 	rm -f NP-VERSION-FILE

debian/patches/03_epn

@@ -0,0 +1,8 @@
+--- a/plugins-scripts/check_disk_smb.pl
++++ b/plugins-scripts/check_disk_smb.pl
+@@ -1,4 +1,5 @@
+ #!@PERL@ -w
++# nagios: -epn
+ #
+ #
+ # check_disk.pl <host> <share> <user> <pass> [warn] [critical] [port]

debian/patches/series

@@ -0,0 +1,4 @@
+02_check_icmp_links
+03_epn
+# commited upstream
+# feature patches

debian/pluginconfig/apt.cfg

@@ -0,0 +1,12 @@
+# 'check_apt' command definition
+define command{
+	command_name	check_apt
+	command_line	/usr/lib/nagios/plugins/check_apt
+	}
+
+# 'check_apt_distupgrade' command definition
+define command{
+	command_name	check_apt_distupgrade
+	command_line	/usr/lib/nagios/plugins/check_apt -d
+	}
+

debian/pluginconfig/breeze.cfg

@@ -0,0 +1,5 @@
+# 'check_breeze' command definition
+define command {
+	command_name    check_breeze
+	command_line    /usr/lib/nagios/plugins/check_breeze -H '$HOSTADDRESS$' -w '$ARG1$' -c '$ARG2$'
+}

debian/pluginconfig/curl-http.cfg

@@ -0,0 +1,111 @@
+# 'check_curl_http' command definition
+define command{
+	command_name	check_curl_http
+	command_line	/usr/lib/nagios/plugins/check_curl -H '$HOSTADDRESS$' -I '$HOSTADDRESS$' '$ARG1$'
+	}
+
+# 'check_curl_httpname' command definition
+define command{
+	command_name	check_curl_httpname
+	command_line	/usr/lib/nagios/plugins/check_curl -H '$HOSTNAME$' -I '$HOSTADDRESS$' '$ARG1$'
+	}
+
+# 'check_curl_http2' command definition
+define command{
+	command_name	check_curl_http2
+	command_line	/usr/lib/nagios/plugins/check_curl -H '$ARG1$' -I '$HOSTADDRESS$' -w '$ARG2$' -c '$ARG3$' '$ARG4$'
+	}
+
+# 'check_curl_squid' command definition
+define command{
+	command_name	check_curl_squid
+	command_line	/usr/lib/nagios/plugins/check_curl -H '$HOSTADDRESS$' -p '$ARG1$'  -u '$ARG2$'
+	}
+
+# 'check_curl_https' command definition
+define command{
+	command_name    check_curl_https
+	command_line	/usr/lib/nagios/plugins/check_curl --ssl -H '$HOSTADDRESS$' -I '$HOSTADDRESS$' '$ARG1$'
+	}
+
+# 'check_curl_https_httpname' command definition
+define command{
+	command_name	check_curl_https_hostname
+	command_line	/usr/lib/nagios/plugins/check_curl --ssl -H '$HOSTNAME$' -I '$HOSTADDRESS$' '$ARG1$'
+	}
+
+# 'check_curl_https_auth' command definition
+define command{
+	command_name	check_curl_https_auth
+	command_line	/usr/lib/nagios/plugins/check_curl --ssl -H '$HOSTADDRESS$' -I '$HOSTADDRESS$' -a '$ARG1$' '$ARG2$'
+	}
+
+# 'check_curl_https_auth_hostname' command definition
+define command{
+	command_name	check_curl_https_auth_hostname
+	command_line	/usr/lib/nagios/plugins/check_curl --ssl -H '$HOSTNAME$' -I '$HOSTADDRESS$' -a '$ARG1$' '$ARG2$'
+	}
+
+# 'check_curl_cups' command definition
+define command{
+	command_name	check_curl_cups
+	command_line	/usr/lib/nagios/plugins/check_curl -I '$HOSTADDRESS$' -p 631 '$ARG1$'
+	}
+
+####
+# use these checks, if you want to test IPv4 connectivity on IPv6 enabled systems
+####
+
+# 'check_curl_http_4' command definition
+define command{
+        command_name    check_curl_http_4
+        command_line    /usr/lib/nagios/plugins/check_curl -H '$HOSTADDRESS$' -I '$HOSTADDRESS$' -4 '$ARG1$'
+        }
+
+# 'check_curl_httpname_4' command definition
+define command{
+	command_name	check_curl_httpname_4
+	command_line	/usr/lib/nagios/plugins/check_curl -H '$HOSTNAME$' -I '$HOSTADDRESS$' -4 '$ARG1$'
+	}
+
+# 'check_curl_http2_4' command definition
+define command{
+        command_name    check_curl_http2_4
+        command_line    /usr/lib/nagios/plugins/check_curl -H '$ARG1$' -I '$HOSTADDRESS$' -w '$ARG2$' -c '$ARG3$' -4 '$ARG4$'
+        }
+
+# 'check_curl_squid_4' command definition
+define command{
+        command_name    check_curl_squid_4
+        command_line    /usr/lib/nagios/plugins/check_curl -H '$HOSTADDRESS$' -p '$ARG1$'  -u '$ARG2$' -4
+        }
+
+# 'check_curl_https_4' command definition
+define command{
+        command_name    check_curl_https_4
+        command_line    /usr/lib/nagios/plugins/check_curl --ssl -H '$HOSTADDRESS$' -I '$HOSTADDRESS$' -4 '$ARG1$'
+	}
+
+# 'check_curls_https_hostname_4' command definition
+define command{
+	command_name	check_curl_https_hostname_4
+	command_line	/usr/lib/nagios/plugins/check_curl --ssl -H '$HOSTNAME$' -I '$HOSTADDRESS$' -4 '$ARG1$'
+	}
+
+# 'check_curl_https_auth_4' command definition
+define command{
+        command_name    check_curl_https_auth_4
+        command_line    /usr/lib/nagios/plugins/check_curl --ssl -H '$HOSTADDRESS$' -I '$HOSTADDRESS$' -a '$ARG1$' -4 '$ARG2$'
+        }
+
+# 'check_curl_https_auth_hostname_4' command definition
+define command{
+	command_name	check_curl_https_auth_hostname_4
+	command_line	/usr/lib/nagios/plugins/check_curl --ssl -H '$HOSTNAME' -I '$HOSTADDRESS$' -a '$ARG1$' -4 '$ARG2$'
+	}
+
+# 'check_curl_cups_4' command definition
+define command{
+	command_name	check_curl_cups_4
+	command_line	/usr/lib/nagios/plugins/check_curl -I '$HOSTADDRESS$' -p 631 -4 '$ARG1$'
+	}

debian/pluginconfig/dhcp.cfg

@@ -0,0 +1,15 @@
+# note: these plugins require root privilege.  see README.Debian for
+# more information on how it is recommended that you do this.
+
+# 'check_dhcp' command definition
+define command{
+	command_name	check_dhcp
+	command_line	/usr/lib/nagios/plugins/check_dhcp -s '$HOSTADDRESS$' '$ARG1$'
+	}
+
+# 'check_dhcp_interface' command definition
+define command{
+	command_name	check_dhcp_interface
+	command_line	/usr/lib/nagios/plugins/check_dhcp -s '$HOSTADDRESS$' -i '$ARG1$' '$ARG2$'
+	}
+

debian/pluginconfig/disk-smb.cfg

@@ -0,0 +1,54 @@
+# 'check_disk_smb' command definition
+define command{
+	command_name	check_disk_smb
+	command_line	/usr/lib/nagios/plugins/check_disk_smb -H '$ARG1$' -s '$ARG2$'
+	}
+
+
+# 'check_disk_smb_workgroup' command definition
+define command{
+	command_name	check_disk_smb_workgroup
+	command_line	/usr/lib/nagios/plugins/check_disk_smb -H '$ARG1$' -s '$ARG2$' -W '$ARG3$'
+	}
+
+
+# 'check_disk_smb_host' command definition
+define command{
+	command_name	check_disk_smb_host
+	command_line	/usr/lib/nagios/plugins/check_disk_smb -a '$HOSTADDRESS$' -H '$ARG1$' -s '$ARG2$'
+	}
+
+
+# 'check_disk_smb_workgroup_host' command definition
+define command{
+	command_name	check_disk_smb_workgroup_host
+	command_line	/usr/lib/nagios/plugins/check_disk_smb -a '$HOSTADDRESS$' -H '$ARG1$' -s '$ARG2$' -W '$ARG3$'
+	}
+
+
+# 'check_disk_smb_user' command definition
+define command{
+	command_name	check_disk_smb_user
+	command_line	/usr/lib/nagios/plugins/check_disk_smb -H '$ARG1$' -s '$ARG2$' -u '$ARG3$' -p '$ARG4$' -w '$ARG5$' -c '$ARG6$'
+	}
+
+
+# 'check_disk_smb_workgroup_user' command definition
+define command{
+	command_name	check_disk_smb_workgroup_user
+	command_line	/usr/lib/nagios/plugins/check_disk_smb -H '$ARG1$' -s '$ARG2$' -W '$ARG3$' -u '$ARG4$' -p '$ARG5$'
+	}
+
+
+# 'check_disk_smb_host_user' command definition
+define command{
+	command_name	check_disk_smb_host_user
+	command_line	/usr/lib/nagios/plugins/check_disk_smb -a '$HOSTADDRESS$' -H '$ARG1$' -s '$ARG2$' -u '$ARG3$' -p '$ARG4$'
+	}
+
+
+# 'check_disk_smb_workgroup_host_user' command definition
+define command{
+	command_name	check_disk_smb_workgroup_host_user
+	command_line	/usr/lib/nagios/plugins/check_disk_smb -a '$HOSTADDRESS$' -H '$ARG1$' -s '$ARG2$' -W '$ARG3$' -u '$ARG4$' -p '$ARG5$'
+	}

debian/pluginconfig/disk.cfg

@@ -0,0 +1,27 @@
+# 'check_disk' command definition
+define command{
+	command_name	check_disk
+	command_line	/usr/lib/nagios/plugins/check_disk -w '$ARG1$' -c '$ARG2$' -e -p '$ARG3$'
+	}
+
+# 'check_all_disks' command definition
+define command{
+	command_name	check_all_disks
+	command_line	/usr/lib/nagios/plugins/check_disk -w '$ARG1$' -c '$ARG2$' -e
+	}
+
+# 'ssh_disk' command definition
+define command{
+	command_name	ssh_disk
+	command_line    /usr/lib/nagios/plugins/check_by_ssh -H '$HOSTADDRESS$' -C "/usr/lib/nagios/plugins/check_disk -w '$ARG1$' -c '$ARG2$' -e -p '$ARG3$'"
+	}
+
+####
+# use these checks, if you want to test IPv4 connectivity on IPv6 enabled systems
+####
+
+# 'ssh_disk_4' command definition
+define command{
+        command_name    ssh_disk_4
+        command_line    /usr/lib/nagios/plugins/check_by_ssh -H '$HOSTADDRESS$' -C "/usr/lib/nagios/plugins/check_disk -w '$ARG1$' -c '$ARG2$' -e -p '$ARG3$'" -4
+        }

debian/pluginconfig/dns.cfg

@@ -0,0 +1,11 @@
+# 'check_dns' command definition
+define command{
+	command_name	check_dns
+	command_line	/usr/lib/nagios/plugins/check_dns -H www.google.com -s '$HOSTADDRESS$' '$ARG1$'
+}
+
+# 'check_dig' command definition
+define command{
+	command_name    check_dig
+	command_line    /usr/lib/nagios/plugins/check_dig -H '$HOSTADDRESS$' -l '$ARG1$' '$ARG2$'
+}

debian/pluginconfig/dummy.cfg

@@ -0,0 +1,29 @@
+# return-ok definition
+define command {
+	command_name    return-ok
+	command_line    /usr/lib/nagios/plugins/check_dummy 0
+}
+
+# return-warning definition
+define command {
+	command_name    return-warning
+	command_line    /usr/lib/nagios/plugins/check_dummy 1
+}
+
+# return-critical definition
+define command {
+	command_name    return-critical
+	command_line    /usr/lib/nagios/plugins/check_dummy 2
+}
+
+# return-unknown definition
+define command {
+	command_name    return-unknown
+	command_line    /usr/lib/nagios/plugins/check_dummy 3
+}
+
+# return-numeric definition
+define command {
+	command_name    return-numeric
+	command_line    /usr/lib/nagios/plugins/check_dummy '$ARG1$'
+}

debian/pluginconfig/flexlm.cfg

@@ -0,0 +1,6 @@
+# 'check_flexlm' command definition
+define command{
+	command_name	check_flexlm
+	command_line	/usr/lib/nagios/plugins/check_flexlm -F '$ARG1$'
+	}
+

debian/pluginconfig/fping.cfg

@@ -0,0 +1,5 @@
+# 'check-fast-alive' command definition
+define command{
+	command_name	check-fast-alive
+	command_line	/usr/lib/nagios/plugins/check_fping -H '$HOSTADDRESS$'
+	}

debian/pluginconfig/ftp.cfg

@@ -0,0 +1,15 @@
+# 'check_ftp' command definition
+define command{
+	command_name	check_ftp
+	command_line	/usr/lib/nagios/plugins/check_ftp -H '$HOSTADDRESS$' '$ARG1$'
+	}
+
+####
+# use these checks, if you want to test IPv4 connectivity on IPv6 enabled systems
+####
+
+# 'check_ftp_4' command definition
+define command{
+        command_name    check_ftp_4
+        command_line    /usr/lib/nagios/plugins/check_ftp -H '$HOSTADDRESS$' -4 '$ARG1$'
+        }

debian/pluginconfig/games.cfg

@@ -0,0 +1,14 @@
+# 'check_quake' command definition
+define command{
+	command_name	check_quake
+	command_line	/usr/lib/nagios/plugins/check_game qs '$HOSTADDRESS$'
+	}
+
+
+# 'check_unreal' command definition
+define command{
+	command_name	check_unreal
+	command_line	/usr/lib/nagios/plugins/check_game uns '$HOSTADDRESS$' -P '$ARG1$' -p 8
+	}
+
+

debian/pluginconfig/hppjd.cfg

@@ -0,0 +1,6 @@
+# 'check_hpjd' command definition
+define command{
+	command_name	check_hpjd
+	command_line	/usr/lib/nagios/plugins/check_hpjd -H '$HOSTADDRESS$' -C public
+	}
+

debian/pluginconfig/http.cfg

@@ -0,0 +1,111 @@
+# 'check_http' command definition
+define command{
+	command_name	check_http
+	command_line	/usr/lib/nagios/plugins/check_http -H '$HOSTADDRESS$' -I '$HOSTADDRESS$' '$ARG1$'
+	}
+
+# 'check_http_hostname' command definition
+define command{
+	command_name	check_httpname
+	command_line	/usr/lib/nagios/plugins/check_http -H '$HOSTNAME$' -I '$HOSTADDRESS$' '$ARG1$'
+	}
+
+# 'check_http2' command definition
+define command{
+	command_name	check_http2
+	command_line	/usr/lib/nagios/plugins/check_http -H '$ARG1$' -I '$HOSTADDRESS$' -w '$ARG2$' -c '$ARG3$' '$ARG4$'
+	}
+
+# 'check_squid' command definition
+define command{
+	command_name	check_squid
+	command_line	/usr/lib/nagios/plugins/check_http -H '$HOSTADDRESS$' -p '$ARG1$'  -u '$ARG2$'
+	}
+
+# 'check_https' command definition
+define command{
+	command_name    check_https
+	command_line	/usr/lib/nagios/plugins/check_http --ssl -H '$HOSTADDRESS$' -I '$HOSTADDRESS$' '$ARG1$'
+	}
+
+# 'check_https_hostname' command definition
+define command{
+	command_name	check_https_hostname
+	command_line	/usr/lib/nagios/plugins/check_http --ssl -H '$HOSTNAME$' -I '$HOSTADDRESS$' '$ARG1$'
+	}
+
+# 'check_https_auth' command definition
+define command{
+	command_name	check_https_auth
+	command_line	/usr/lib/nagios/plugins/check_http --ssl -H '$HOSTADDRESS$' -I '$HOSTADDRESS$' -a '$ARG1$' '$ARG2$'
+	}
+
+# 'check_https_auth_hostname' command definition
+define command{
+	command_name	check_https_auth_hostname
+	command_line	/usr/lib/nagios/plugins/check_http --ssl -H '$HOSTNAME$' -I '$HOSTADDRESS$' -a '$ARG1$' '$ARG2$'
+	}
+
+# 'check_cups' command definition
+define command{
+	command_name	check_cups
+	command_line	/usr/lib/nagios/plugins/check_http -I '$HOSTADDRESS$' -p 631 '$ARG1$'
+	}
+
+####
+# use these checks, if you want to test IPv4 connectivity on IPv6 enabled systems
+####
+
+# 'check_http_4' command definition
+define command{
+        command_name    check_http_4
+        command_line    /usr/lib/nagios/plugins/check_http -H '$HOSTADDRESS$' -I '$HOSTADDRESS$' -4 '$ARG1$'
+        }
+
+# 'check_http_hostname_4' command definition
+define command{
+	command_name	check_httpname_4
+	command_line	/usr/lib/nagios/plugins/check_http -H '$HOSTNAME$' -I '$HOSTADDRESS$' -4 '$ARG1$'
+	}
+
+# 'check_http2_4' command definition
+define command{
+        command_name    check_http2_4
+        command_line    /usr/lib/nagios/plugins/check_http -H '$ARG1$' -I '$HOSTADDRESS$' -w '$ARG2$' -c '$ARG3$' -4 '$ARG4$'
+        }
+
+# 'check_squid_4' command definition
+define command{
+        command_name    check_squid_4
+        command_line    /usr/lib/nagios/plugins/check_http -H '$HOSTADDRESS$' -p '$ARG1$'  -u '$ARG2$' -4
+        }
+
+# 'check_https_4' command definition
+define command{
+        command_name    check_https_4
+        command_line    /usr/lib/nagios/plugins/check_http --ssl -H '$HOSTADDRESS$' -I '$HOSTADDRESS$' -4 '$ARG1$'
+	}
+
+# 'check_https_hostname_4' command definition
+define command{
+	command_name	check_https_hostname_4
+	command_line	/usr/lib/nagios/plugins/check_http --ssl -H '$HOSTNAME$' -I '$HOSTADDRESS$' -4 '$ARG1$'
+	}
+
+# 'check_https_auth_4' command definition
+define command{
+        command_name    check_https_auth_4
+        command_line    /usr/lib/nagios/plugins/check_http --ssl -H '$HOSTADDRESS$' -I '$HOSTADDRESS$' -a '$ARG1$' -4 '$ARG2$'
+        }
+
+# 'check_https_auth_hostname_4' command definition
+define command{
+	command_name	check_https_auth_hostname_4
+	command_line	/usr/lib/nagios/plugins/check_http --ssl -H '$HOSTNAME' -I '$HOSTADDRESS$' -a '$ARG1$' -4 '$ARG2$'
+	}
+
+# 'check_cups_4' command definition
+define command{
+	command_name	check_cups_4
+	command_line	/usr/lib/nagios/plugins/check_http -I '$HOSTADDRESS$' -p 631 -4 '$ARG1$'
+	}

debian/pluginconfig/ifstatus.cfg

@@ -0,0 +1,23 @@
+# 'check_ifstatus' command definition
+define command{
+	command_name	check_ifstatus
+	command_line	/usr/lib/nagios/plugins/check_ifstatus -H '$HOSTADDRESS$' -C '$ARG1$'
+	}
+
+# 'check_ifstatus_exclude' command definition
+define command{
+        command_name    check_ifstatus_exclude
+        command_line    /usr/lib/nagios/plugins/check_ifstatus -H '$HOSTADDRESS$' -C '$ARG1$' -x '$ARG2$'
+        }
+
+# 'check_ifoperstatus_ifindex' command definition
+define command{
+	command_name	check_ifoperstatus_ifindex
+	command_line	/usr/lib/nagios/plugins/check_ifoperstatus -H '$HOSTADDRESS$' -C '$ARG1$' -k '$ARG2$'
+	}
+
+# 'check_ifoperstatus_ifdescr' command definition
+define command{
+	command_name	check_ifoperstatus_ifdescr
+	command_line	/usr/lib/nagios/plugins/check_ifoperstatus -H '$HOSTADDRESS$' -C '$ARG1$' -d '$ARG2$'
+	}

debian/pluginconfig/jabber.cfg

@@ -0,0 +1,12 @@
+# 'check_jabber_4' command definition
+define command{
+        command_name    check_jabber_4
+        command_line    /usr/lib/nagios/plugins/check_jabber -4 -H $HOSTADDRESS$ '$ARG1$'
+        }
+
+# 'check_jabber' command definition
+define command{
+        command_name    check_jabber
+        command_line    /usr/lib/nagios/plugins/check_jabber -H $HOSTADDRESS$ '$ARG1$'
+        }
+

debian/pluginconfig/ldap.cfg

@@ -0,0 +1,31 @@
+# 'check_ldap' command definition
+define command{
+	command_name	check_ldap
+	command_line	/usr/lib/nagios/plugins/check_ldap -H '$HOSTADDRESS$' -b '$ARG1$'
+	}
+
+# 'check_ldaps' command definition
+# This was using 'check_ldaps' in the past which used port 389 and starttls
+# mechanism on default, keeped for backward compatibility
+define command{
+	command_name	check_ldaps
+	command_line	/usr/lib/nagios/plugins/check_ldap -H '$HOSTADDRESS$' -T -b '$ARG1$'
+	}
+
+####
+# use these checks, if you want to test IPv4 connectivity on IPv6 enabled systems
+####
+
+# 'check_ldap_4' command definition
+define command{
+	command_name	check_ldap_4
+	command_line	/usr/lib/nagios/plugins/check_ldap -H '$HOSTADDRESS$' -b '$ARG1$' -4
+	}
+
+# 'check_ldaps_4' command definition
+# This was using 'check_ldaps' in the past which used port 389 and starttls
+# mechanism on default, keeped for backward compatibility
+define command{
+	command_name	check_ldaps_4
+	command_line	/usr/lib/nagios/plugins/check_ldap -H '$HOSTADDRESS$' -T -b '$ARG1$' -4
+	}

debian/pluginconfig/load.cfg

@@ -0,0 +1,6 @@
+# 'check_load' command definition
+define command{
+	command_name	check_load
+	command_line	/usr/lib/nagios/plugins/check_load --warning='$ARG1$,$ARG2$,$ARG3$' --critical='$ARG4$,$ARG5$,$ARG6$'
+	}
+

debian/pluginconfig/mail.cfg

@@ -0,0 +1,77 @@
+# 'check_pop' command definition
+define command {
+	command_name	check_pop
+	command_line	/usr/lib/nagios/plugins/check_pop -H '$HOSTADDRESS$' '$ARG1$'
+}
+
+
+# 'check_smtp' command definition
+define command {
+	command_name	check_smtp
+	command_line	/usr/lib/nagios/plugins/check_smtp -H '$HOSTADDRESS$' '$ARG1$'
+}
+
+# 'check_ssmtp' command definition
+define command {
+	command_name	check_ssmtp
+	command_line	/usr/lib/nagios/plugins/check_ssmtp -H '$HOSTADDRESS$' '$ARG1$'
+}
+
+# 'check_imap' command definition
+define command {
+	command_name	check_imap
+	command_line	/usr/lib/nagios/plugins/check_imap -H '$HOSTADDRESS$' '$ARG1$'
+}
+
+# 'check_spop' command definition
+define command {
+	command_name	check_spop
+	command_line	/usr/lib/nagios/plugins/check_pop -p 995 -H '$HOSTADDRESS$' -S '$ARG1$'
+}
+
+
+# 'check_simap' command definition
+define command {
+	command_name	check_simap
+	command_line	/usr/lib/nagios/plugins/check_imap -p 993 -H '$HOSTADDRESS$' -S '$ARG1$'
+}
+
+####
+# use these checks, if you want to test IPv4 connectivity on IPv6 enabled systems
+####
+
+# 'check_pop_4' command definition
+define command {
+        command_name    check_pop_4
+        command_line    /usr/lib/nagios/plugins/check_pop -H '$HOSTADDRESS$' -4 '$ARG1$'
+}
+
+# 'check_smtp_4' command definition
+define command {
+        command_name    check_smtp_4
+        command_line    /usr/lib/nagios/plugins/check_smtp -H '$HOSTADDRESS$' -4 '$ARG1$'
+}
+
+# 'check_ssmtp_4' command definition
+define command {
+        command_name    check_ssmtp_4
+        command_line    /usr/lib/nagios/plugins/check_ssmtp -H '$HOSTADDRESS$' -4 '$ARG1$'
+}
+
+# 'check_imap_4' command definition
+define command {
+        command_name    check_imap_4
+        command_line    /usr/lib/nagios/plugins/check_imap -H '$HOSTADDRESS$' -4 '$ARG1$'
+}
+
+# 'check_spop_4' command definition
+define command {
+        command_name    check_spop_4
+        command_line    /usr/lib/nagios/plugins/check_pop -p 995 -H '$HOSTADDRESS$' -S -4 '$ARG1$'
+}
+
+# 'check_simap_4' command definition
+define command {
+        command_name    check_simap_4
+        command_line    /usr/lib/nagios/plugins/check_imap -p 993 -H '$HOSTADDRESS$' -S -4 '$ARG1$'
+}

debian/pluginconfig/mailq.cfg

@@ -0,0 +1,24 @@
+# 'check-mailq' for sendmail
+define command {
+        command_name    check_mailq_sendmail
+	command_line    /usr/lib/nagios/plugins/check_mailq -w '$ARG1$' -c '$ARG2$' -M sendmail
+}
+
+# 'check-mailq' for postfix
+define command {
+        command_name    check_mailq_postfix
+	command_line    /usr/lib/nagios/plugins/check_mailq -w '$ARG1$' -c '$ARG2$' -M postfix
+}
+
+# 'check-mailq' for exim
+define command {
+        command_name    check_mailq_exim
+	command_line    /usr/lib/nagios/plugins/check_mailq -w '$ARG1$' -c '$ARG2$' -M exim
+}
+
+# 'check-mailq' for qmail
+define command {
+        command_name    check_mailq_qmail
+	command_line    /usr/lib/nagios/plugins/check_mailq -w '$ARG1$' -c '$ARG2$' -M qmail
+}
+

debian/pluginconfig/mrtg.cfg

@@ -0,0 +1,14 @@
+# 'check_mrtg' command definition
+define command{
+	command_name	check_mrtg
+	command_line	/usr/lib/nagios/plugins/check_mrtg '$ARG1$' 10 AVG '$ARG2$' '$ARG3$' '$ARG4$' '$ARG5$' '$ARG6$'
+	}
+
+
+# 'traffic_average' command definition
+define command{
+	command_name	traffic_average
+	command_line	/usr/lib/nagios/plugins/check_mrtgtraf '$ARG1$' 10 AVG '$ARG2$' '$ARG3$' '$ARG4$' '$ARG5$'
+	}
+
+

debian/pluginconfig/mysql.cfg

@@ -0,0 +1,24 @@
+# 'check_mysql' command definition
+define command{
+        command_name    check_mysql
+	command_line    /usr/lib/nagios/plugins/check_mysql -H '$HOSTADDRESS$' '$ARG1$'
+}
+
+# 'check_mysql_cmdlinecred' command definition
+define command{
+	command_name    check_mysql_cmdlinecred
+	command_line    /usr/lib/nagios/plugins/check_mysql -H '$HOSTADDRESS$' -u '$ARG1$' -p '$ARG2$' '$ARG3$'
+}
+
+# 'check_mysql_database' command definition
+define command{
+	command_name	check_mysql_database
+	command_line	/usr/lib/nagios/plugins/check_mysql -d '$ARG3$' -H '$HOSTADDRESS$' -u '$ARG1$' -p '$ARG2$' '$ARG3$'
+}
+
+# 'check_mysql_slave' command definition
+define command{
+        command_name    check_mysql_slave
+        command_line    /usr/lib/nagios/plugins/check_mysql -H '$HOSTADDRESS$' -u '$ARG1$' -p '$ARG2$' -S '$ARG3$'
+}
+

debian/pluginconfig/netware.cfg

@@ -0,0 +1,84 @@
+# 'check_netware_logins' command definition
+define command{
+	command_name	check_netware_logins
+	command_line	/usr/lib/nagios/plugins/check_nwstat -H '$HOSTADDRESS$' -v "LOGINS" -w '$ARG1$' -c '$ARG2$'
+	}
+
+
+# 'check_nwstat_conns' command definition
+define command{
+	command_name	check_nwstat_conns
+	command_line	/usr/lib/nagios/plugins/check_nwstat -H '$HOSTADDRESS$' -v CONNS -w '$ARG1$' -c '$ARG2$'
+	}
+
+
+# 'check_netware_1load' command definition
+define command{
+	command_name	check_netware_1load
+	command_line	/usr/lib/nagios/plugins/check_nwstat -H '$HOSTADDRESS$' -v "LOAD1" -w 70 -c 90
+	}
+
+
+# 'check_netware_5load' command definition
+define command{
+	command_name	check_netware_5load
+	command_line	/usr/lib/nagios/plugins/check_nwstat -H '$HOSTADDRESS$' -v "LOAD5" -w 70 -c 90
+	}
+
+
+# 'check_netware_15load' command definition
+define command{
+	command_name	check_netware_15load
+	command_line	/usr/lib/nagios/plugins/check_nwstat -H '$HOSTADDRESS$' -v "LOAD15" -w 70 -c 90
+	}
+
+
+# 'check_nwstat_vol_p' command definition
+define command{
+	command_name	check_nwstat_vol_p
+	command_line	/usr/lib/nagios/plugins/check_nwstat -H '$HOSTADDRESS$' -v VPF'$ARG1$' -w '$ARG2$' -c '$ARG3$'
+	}
+
+
+# 'check_nwstat_vol_k' command definition
+define command{
+	command_name	check_nwstat_vol_k
+	command_line	/usr/lib/nagios/plugins/check_nwstat -H '$HOSTADDRESS$' -v VKF'$ARG1$' -w '$ARG2$' -c '$ARG3$'
+	}
+
+
+# 'check_nwstat_ltch' command definition
+define command{
+	command_name	check_nwstat_ltch
+	command_line	/usr/lib/nagios/plugins/check_nwstat -H '$HOSTADDRESS$' -v LTCH -w '$ARG1$' -c '$ARG2$'
+	}
+
+
+# 'check_nwstat_puprb' command definition
+define command{
+	command_name	check_nwstat_puprb
+	command_line	/usr/lib/nagios/plugins/check_nwstat -H '$HOSTADDRESS$' -v PUPRB -w '$ARG1$' -c '$ARG2$'
+	}
+
+
+# 'check_nwstat_dsdb' command definition
+define command{
+	command_name	check_nwstat_dsdb
+	command_line	/usr/lib/nagios/plugins/check_nwstat -H '$HOSTADDRESS$' -v DSDB
+	}
+
+
+# 'check_netware_abend' command definition
+define command{
+	command_name	check_netware_abend
+	command_line	/usr/lib/nagios/plugins/check_nwstat -H '$HOSTADDRESS$' -v "ABENDS" -w 10 -c 30
+	}
+
+
+# 'check_nwstat_csprocs' command definition
+define command{
+	command_name	check_nwstat_csprocs
+	command_line	/usr/lib/nagios/plugins/check_nwstat -H '$HOSTADDRESS$' -v CSPROCS -w '$ARG1$' -c '$ARG2$'
+	}
+
+

debian/pluginconfig/news.cfg

@@ -0,0 +1,15 @@
+# 'check_nntp' command definition
+define command{
+	command_name	check_nntp
+	command_line	/usr/lib/nagios/plugins/check_nntp -H '$HOSTADDRESS$' '$ARG1$'
+	}
+
+####
+# use these checks, if you want to test IPv4 connectivity on IPv6 enabled systems
+####
+
+# 'check_nntp_4' command definition
+define command{
+        command_name    check_nntp_4
+        command_line    /usr/lib/nagios/plugins/check_nntp -H '$HOSTADDRESS$' -4 '$ARG1$'
+        }

debian/pluginconfig/nt.cfg

@@ -0,0 +1,15 @@
+# If you are confused about this command definition, cause you was
+# reading other suggestions, please have a look into
+# /usr/share/doc/monitoring-plugins/README.Debian
+
+# 'check_nt' command definition
+define command {
+	command_name    check_nt
+	command_line    /usr/lib/nagios/plugins/check_nt -H '$HOSTADDRESS$' -v '$ARG1$'
+}
+
+# 'check_nscp' command definition
+define command {
+	command_name	check_nscp
+	command_line	/usr/lib/nagios/plugins/check_nt -H '$HOSTADDRESS$' -p 12489 -v '$ARG1$'
+}

debian/pluginconfig/ntp.cfg

@@ -0,0 +1,17 @@
+# 'check_ntp' command definition
+define command{
+	command_name	check_ntp
+	command_line	/usr/lib/nagios/plugins/check_ntp_peer -H '$HOSTADDRESS$' '$ARG1$'
+	}
+
+# 'check_ntp_ntpq' command definition
+define command{
+	command_name	check_ntp_ntpq
+	command_line	/usr/lib/nagios/plugins/check_ntp_peer -H '$HOSTADDRESS$' -j 10 -k 15 '$ARG1$'
+	}
+
+# 'check_time' command definition
+define command{
+	command_name	check_time
+	command_line	/usr/lib/nagios/plugins/check_time -H '$HOSTADDRESS$' '$ARG1$'
+	}

debian/pluginconfig/pgsql.cfg

@@ -0,0 +1,15 @@
+# 'check_pgsql' command definition
+define command{
+	command_name	check_pgsql
+	command_line	/usr/lib/nagios/plugins/check_pgsql -H '$HOSTADDRESS$' '$ARG1$'
+	}
+
+####
+# use these checks, if you want to test IPv4 connectivity on IPv6 enabled systems
+####
+
+# 'check_pgsql_4' command definition
+define command{
+        command_name    check_pgsql_4
+        command_line    /usr/lib/nagios/plugins/check_pgsql -H '$HOSTADDRESS$' -4 '$ARG1$'
+        }

debian/pluginconfig/ping.cfg

@@ -0,0 +1,72 @@
+# 'check_ping' command definition
+define command{
+	command_name	check_ping
+	command_line	/usr/lib/nagios/plugins/check_ping -H '$HOSTADDRESS$' -w '$ARG1$' -c '$ARG2$'
+	}
+
+
+# 'check-host-alive' command definition
+define command{
+	command_name	check-host-alive
+	command_line	/usr/lib/nagios/plugins/check_ping -H '$HOSTADDRESS$' -w 5000,100% -c 5000,100% -p 1
+	}
+
+
+# 'check-printer-alive' command definition
+define command{
+	command_name	check-printer-alive
+	command_line	/usr/lib/nagios/plugins/check_ping -H '$HOSTADDRESS$' -w 5000,100% -c 5000,100% -p 1
+	}
+
+
+# 'check-switch-alive' command definition
+define command{
+	command_name	check-switch-alive
+	command_line	/usr/lib/nagios/plugins/check_ping -H '$HOSTADDRESS$' -w 5000,100% -c 5000,100% -p 1
+	}
+
+
+# 'check-router-alive' command definition
+define command{
+	command_name	check-router-alive
+	command_line	/usr/lib/nagios/plugins/check_ping -H '$HOSTADDRESS$' -w 5000,100% -c 5000,100% -p 1
+	}
+
+####
+# use these checks, if you want to test IPv4 connectivity on IPv6 enabled systems
+####
+
+# 'check_ping_4' command definition
+define command{
+	command_name	check_ping_4
+	command_line	/usr/lib/nagios/plugins/check_ping -H '$HOSTADDRESS$' -w '$ARG1$' -c '$ARG2$' -4
+	}
+
+
+# 'check-host-alive_4' command definition
+define command{
+	command_name	check-host-alive_4
+	command_line	/usr/lib/nagios/plugins/check_ping -H '$HOSTADDRESS$' -w 5000,100% -c 5000,100% -p 1 -4
+	}
+
+
+# 'check-printer-alive_4' command definition
+define command{
+	command_name	check-printer-alive_4
+	command_line	/usr/lib/nagios/plugins/check_ping -H '$HOSTADDRESS$' -w 5000,100% -c 5000,100% -p 1 -4
+	}
+
+
+# 'check-switch-alive_4' command definition
+define command{
+	command_name	check-switch-alive_4
+	command_line	/usr/lib/nagios/plugins/check_ping -H '$HOSTADDRESS$' -w 5000,100% -c 5000,100% -p 1 -4
+	}
+
+
+# 'check-router-alive_4' command definition
+define command{
+	command_name	check-router-alive_4
+	command_line	/usr/lib/nagios/plugins/check_ping -H '$HOSTADDRESS$' -w 5000,100% -c 5000,100% -p 1 -4
+	}
+

debian/pluginconfig/procs.cfg

@@ -0,0 +1,20 @@
+# 'check_procs' command definition
+define command{
+	command_name	check_procs
+	command_line	/usr/lib/nagios/plugins/check_procs -w '$ARG1$' -c '$ARG2$'
+	}
+
+
+# 'check_procs_zombie' command definition
+define command{
+	command_name	check_procs_zombie
+	command_line	/usr/lib/nagios/plugins/check_procs -w '$ARG1$' -c '$ARG2$' -s Z
+	}
+
+
+# 'check_procs_httpd' command definition
+define command{
+	command_name	check_procs_httpd
+	command_line	/usr/lib/nagios/plugins/check_procs -w 5:'$ARG1$' -c 1:'$ARG2$' -C httpd
+	}
+

debian/pluginconfig/radius.cfg

@@ -0,0 +1,6 @@
+# 'check_radius' command definition
+define command{
+	command_name	check_radius
+	command_line	/usr/lib/nagios/plugins/check_radius -F /etc/radcli/radiusclient.conf -H '$HOSTADDRESS$' -P '$ARG4$' -t '$ARG3$' -u '$ARG1$' -p '$ARG2$'
+	}
+

debian/pluginconfig/real.cfg

@@ -0,0 +1,13 @@
+# 'check_real_url' command definition
+define command{
+	command_name	check_real_url
+	command_line	/usr/lib/nagios/plugins/check_real '$HOSTADDRESS$' -p '$ARG1$' -wt '$ARG2$' -ct '$ARG3$' -to 5 -u '$ARG4$'
+	}
+
+
+# 'check_real' command definition
+define command{
+	command_name	check_real
+	command_line	/usr/lib/nagios/plugins/check_real '$HOSTADDRESS$' -p '$ARG1$' -wt '$ARG2$' -ct '$ARG3$' -to 5
+	}
+

debian/pluginconfig/rpc-nfs.cfg

@@ -0,0 +1,14 @@
+
+# 'check-rpc' command definition
+define command{
+	command_name	check-rpc
+	command_line	/usr/lib/nagios/plugins/check_rpc -H '$HOSTADDRESS$' -C '$ARG1$'
+	}
+
+
+# 'check-nfs' command definition
+define command{
+	command_name	check-nfs
+	command_line	/usr/lib/nagios/plugins/check_rpc -H '$HOSTADDRESS$' -C nfs -c2,3
+	}
+

debian/pluginconfig/snmp.cfg

@@ -0,0 +1,132 @@
+# 'snmp_load' command definition
+define command{
+	command_name	snmp_load
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o .1.3.6.1.4.1.2021.10.1.5.1,.1.3.6.1.4.1.2021.10.1.5.2,.1.3.6.1.4.1.2021.10.1.5.3 -w :'$ARG2$',:'$ARG3$',:'$ARG4$' -c :'$ARG5$',:'$ARG6$',:'$ARG7$' -l load
+	}
+
+
+# 'snmp_cpustats' command definition
+define command{
+	command_name	snmp_cpustats
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o .1.3.6.1.4.1.2021.11.9.0,.1.3.6.1.4.1.2021.11.10.0,.1.3.6.1.4.1.2021.11.11.0 -l 'CPU usage (user system idle)' -u '%'
+	}
+
+
+# 'snmp_procname' command definition
+define command{
+	command_name	snmp_procname
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o .1.3.6.1.4.1.2021.2.1.5.'$ARG2$' -w '$ARG3$':'$ARG4$' -c '$ARG5$':'$ARG6$'
+	}
+
+
+# 'snmp_disk' command definition
+define command{
+	command_name	snmp_disk
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o .1.3.6.1.4.1.2021.9.1.7.'$ARG2$',.1.3.6.1.4.1.2021.9.1.9.'$ARG2$' -w '$ARG3$':,:'$ARG4$' -c '$ARG5$':,:'$ARG6$' -u 'kB free (','% used)' -l 'disk space'
+	}
+
+
+# 'snmp_mem' command definition
+define command{
+	command_name	snmp_mem
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o .1.3.6.1.4.1.2021.4.6.0,.1.3.6.1.4.1.2021.4.5.0 -w '$ARG2$': -c '$ARG3$':
+	}
+
+
+# 'snmp_swap' command definition
+define command{
+	command_name	snmp_swap
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o .1.3.6.1.4.1.2021.4.4.0,.1.3.6.1.4.1.2021.4.3.0 -w '$ARG2$': -c '$ARG3$':
+	}
+
+
+# 'snmp_procs' command definition
+define command{
+	command_name	snmp_procs
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o host.hrSystem.hrSystemProcesses -w :'$ARG2$' -c :'$ARG3$' -l processes
+	}
+
+
+# 'snmp_users' command definition
+define command{
+	command_name	snmp_users
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o host.hrSystem.hrSystemNumUsers.0 -w :'$ARG2$' -c :'$ARG3$' -l users
+	}
+
+
+# 'snmp_mem2' command definition
+define command{
+	command_name	snmp_mem2
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageUsed.'$ARG2$',host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageSize.'$ARG2$' -w '$ARG3$' -c '$ARG4$'
+	}
+
+
+# 'snmp_swap2' command definition
+define command{
+	command_name	snmp_swap2
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageUsed.'$ARG2$',host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageSize.'$ARG2$' -w '$ARG3$' -c '$ARG4$'
+	}
+
+
+# 'snmp_mem3' command definition
+define command{
+	command_name	snmp_mem3
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageUsed.'$ARG2$',host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageSize.'$ARG2$' -w '$ARG3$' -c '$ARG4$'
+	}
+
+
+# 'snmp_swap3' command definition
+define command{
+	command_name	snmp_swap3
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageUsed.'$ARG2$',host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageSize.'$ARG2$' -w '$ARG3$' -c '$ARG4$'
+	}
+
+
+# 'snmp_disk2' command definition
+define command{
+	command_name	snmp_disk2
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o host.hrStorage.hrStorageTable.hrStorageEntry.hrStorageUsed.'$ARG2$' -w '$ARG3$' -c '$ARG4$'
+	}
+
+
+# 'snmp_tcpopen' command definition
+define command{
+	command_name	snmp_tcpopen
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o tcp.tcpCurrEstab.0 -w '$ARG2$' -c '$ARG3$'
+	}
+
+
+# 'snmp_tcpstats' command definition
+define command{
+	command_name	snmp_tcpstats
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o tcp.tcpActiveOpens.0,tcp.tcpPassiveOpens.0,tcp.tcpInSegs.0,tcp.tcpOutSegs.0,tcp.tcpRetransSegs.0 -l 'TCP stats'
+	}
+
+
+# 'check_netapp_uptime' command definition
+define command{
+	command_name	check_netapp_uptime
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o .1.3.6.1.2.1.1.3.0 --delimiter=')' -l "Uptime is"
+	}
+
+
+# 'check_netapp_cpuload' command definition
+define command{
+	command_name	check_netapp_cpuload
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o .1.3.6.1.4.1.789.1.2.1.3.0 -w 90 -c 95 -u '%' -l "CPU LOAD "
+	}
+
+
+# 'check_netapp_numdisks' command definition
+define command{
+	command_name	check_netapp_numdisks
+	command_line	/usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o .1.3.6.1.4.1.789.1.6.4.1.0,.1.3.6.1.4.1.789.1.6.4.2.0,.1.3.6.1.4.1.789.1.6.4.8.0,.1.3.6.1.4.1.789.1.6.4.7.0 -u 'Total Disks','Active','Spare','Failed' -l ""
+	}
+
+
+# 'check_compaq_thermalCondition' command definition
+define command{
+	command_name	check_compaq_thermalCondition
+	command_line	 /usr/lib/nagios/plugins/check_snmp -H '$HOSTADDRESS$' -C '$ARG1$' -o .1.3.6.1.4.1.232.6.2.1.0,.1.3.6.1.4.1.232.6.2.2.0,.1.3.6.1.4.1.232.6.2.3.0,.1.3.6.1.4.1.232.6.2.4.0 -u 'ThermalCondition','ThermalTemp','ThermalSystem','ThermalCPUFan' -w 2:2,2:2,2:2,2:2 -c 1:2,1:2,1:2,1:2 -l "Thermal status "
+	}
+

debian/pluginconfig/ssh.cfg

@@ -0,0 +1,27 @@
+# 'check_ssh' command definition
+define command{
+	command_name	check_ssh
+	command_line	/usr/lib/nagios/plugins/check_ssh '$HOSTADDRESS$'
+	}
+
+# 'check_ssh_port' command definition
+define command{
+	command_name    check_ssh_port
+	command_line    /usr/lib/nagios/plugins/check_ssh -p '$ARG1$' '$HOSTADDRESS$'
+	}
+
+####
+# use these checks, if you want to test IPv4 connectivity on IPv6 enabled systems
+####
+
+# 'check_ssh_4' command definition
+define command{
+        command_name    check_ssh_4
+        command_line    /usr/lib/nagios/plugins/check_ssh -4 '$HOSTADDRESS$'
+        }
+
+# 'check_ssh_port_4' command definition
+define command{
+	command_name    check_ssh_port_4
+	command_line    /usr/lib/nagios/plugins/check_ssh -4 -p '$ARG1$' '$HOSTADDRESS$'
+	}

debian/pluginconfig/tcp_udp.cfg

@@ -0,0 +1,27 @@
+# 'check_tcp' command definition
+define command{
+	command_name	check_tcp
+	command_line	/usr/lib/nagios/plugins/check_tcp -H '$HOSTADDRESS$' -p '$ARG1$' '$ARG2$'
+	}
+
+# 'check_udp' command definition
+define command{
+	command_name	check_udp
+	command_line	/usr/lib/nagios/plugins/check_udp -H '$HOSTADDRESS$' -p '$ARG1$' '$ARG2$'
+	}
+
+####
+# use these checks, if you want to test IPv4 connectivity on IPv6 enabled systems
+####
+
+# 'check_tcp_4' command definition
+define command{
+        command_name    check_tcp_4
+        command_line    /usr/lib/nagios/plugins/check_tcp -H '$HOSTADDRESS$' -p '$ARG1$' -4 '$ARG2$'
+        }
+
+# 'check_udp_4' command definition
+define command{
+        command_name    check_udp_4
+        command_line    /usr/lib/nagios/plugins/check_udp -H '$HOSTADDRESS$' -p '$ARG1$' -4 '$ARG2$'
+        }

debian/pluginconfig/telnet.cfg

@@ -0,0 +1,15 @@
+# 'check_telnet' command definition
+define command{
+	command_name	check_telnet
+	command_line	/usr/lib/nagios/plugins/check_tcp -H '$HOSTADDRESS$' -p 23 '$ARG1$'
+	}
+
+####
+# use these checks, if you want to test IPv4 connectivity on IPv6 enabled systems
+####
+
+# 'check_telnet_4' command definition
+define command{
+        command_name    check_telnet_4
+        command_line    /usr/lib/nagios/plugins/check_tcp -H '$HOSTADDRESS$' -p 23 -4 '$ARG1$'
+        }

debian/pluginconfig/users.cfg

@@ -0,0 +1,6 @@
+# 'check_users' command definition
+define command{
+	command_name	check_users
+	command_line	/usr/lib/nagios/plugins/check_users -w '$ARG1$' -c '$ARG2$'
+	}
+

debian/rules

@@ -0,0 +1,233 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# GNU copyright 1997 to 1999 by Joey Hess.
+
+# Uncomment this to turn on verbose mode.
+export DH_VERBOSE=1
+
+# for hardening
+DPKG_EXPORT_BUILDFLAGS = 1
+include /usr/share/dpkg/buildflags.mk
+
+PACKAGE = monitoring-plugins
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+include /usr/share/dpkg/architecture.mk
+
+DEBIANDIR=$(CURDIR)/debian
+NP_LIBEXEC:=/usr/lib/nagios/plugins
+NP_COMMON_DIR:=$(DEBIANDIR)/monitoring-plugins-common
+NP_BASIC_DIR:=$(DEBIANDIR)/monitoring-plugins-basic
+NP_BASIC_TEMPLATES:=$(NP_BASIC_DIR)/usr/share/monitoring-plugins/templates-basic
+NP_STD_DIR:=$(DEBIANDIR)/monitoring-plugins-standard
+NP_STD_TEMPLATES:=$(NP_STD_DIR)/usr/share/monitoring-plugins/templates-standard
+
+std_plugins:=check_breeze check_ifoperstatus check_hpjd check_ifstatus \
+	check_rpc check_snmp check_wave check_fping check_game \
+	check_radius check_mysql check_mysql_query check_pgsql \
+	check_disk_smb check_ldap check_ldaps \
+	check_mailq check_curl \
+	check_dns check_dig check_flexlm check_oracle \
+	check_dbi
+
+common_files:=negate urlize utils.pm utils.sh
+
+basic_plugin_cfgs:=apt dhcp disk dummy ftp http load mail news ntp ping procs \
+	real ssh tcp_udp telnet users
+std_plugin_cfgs:=breeze curl-http disk-smb dns flexlm fping games hppjd ifstatus ldap \
+	mailq mrtg mysql netware nt pgsql radius rpc-nfs snmp
+
+PATH = /bin:/sbin:/usr/bin:/usr/sbin
+
+
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+	CFLAGS += -O0
+else
+	CFLAGS += -O2
+endif
+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
+	INSTALL_PROGRAM += -s
+endif
+
+ifeq ($(DEB_HOST_ARCH_OS),linux)
+PING_CONFIGURE_ARGS = --with-ping-command="/bin/ping -4 -n -U -w %d -c %d %s" \
+                      --with-ping6-command="/bin/ping -6 -n -U -w %d -c %d %s"
+else
+PING_CONFIGURE_ARGS = --with-ping-command="/bin/ping -n -w %d -c %d %s" \
+                      --with-ping6-command="/bin/ping6 -n -w %d -c %d %s"
+endif
+
+
+config.status: configure
+	export PATH=$(PATH)
+	dh_testdir
+	
+	# if /proc is not mounted, check_nagios and check_procs are
+	# silently omitted from build.
+	@if ! [ -d /proc/$$$$ ]; then \
+	  echo "monitoring-plugins needs a mounted /proc to correctly build"; \
+	  exit 1; \
+	fi
+	
+	ln -sf /usr/share/misc/config.sub build-aux
+	ln -sf /usr/share/misc/config.guess build-aux
+	rm -f config.cache
+	
+	# Add here commands to configure the package.
+	# Append 'All warnings', 'Immediate binding' and dpkg-buildflags flags
+	CFLAGS="$$(DEB_CFLAGS_MAINT_APPEND='-Wall -Wl,-z,now' dpkg-buildflags --get CFLAGS)" \
+	PATH_TO_APTGET=/usr/bin/apt-get \
+	PGINCLUDE="-I`pg_config --includedir`" PGLIBS="-lpq -lcrypt" \
+	./configure \
+		--disable-maintainer-mode \
+		--host=$(DEB_HOST_GNU_TYPE) \
+		--build=$(DEB_BUILD_GNU_TYPE) \
+		--prefix=/usr \
+		--mandir=/usr/share/man \
+		--infodir=/usr/share/info \
+		--libexecdir=${NP_LIBEXEC} \
+		--with-perl=/usr/bin/perl \
+		--with-openssl=/usr \
+		--with-pgsql=/usr \
+		--with-mysql=/usr \
+		--with-proc-loadavg=/proc/loadavg \
+		--with-ps-command="/bin/ps axwwo 'stat uid pid ppid vsz rss pcpu etime comm args'" \
+		--with-ps-format="%s %d %d %d %d %d %f %s %s %n" \
+		--with-ps-cols=10 \
+		--with-ps-varlist="procstat,&procuid,&procpid,&procppid,&procvsz,&procrss,&procpcpu,procetime,procprog,&pos" \
+		$(PING_CONFIGURE_ARGS) \
+		--with-nslookup-command="/usr/bin/nslookup -sil" \
+		--with-uptime-command="/usr/bin/uptime" \
+		--with-rpcinfo-command="/usr/sbin/rpcinfo" \
+		--with-smbclient-command="/usr/bin/smbclient" \
+		--with-snmpget-command="/usr/bin/snmpget" \
+		--with-snmpgetnext-command="/usr/bin/snmpgetnext" \
+		--with-qstat-command="/usr/bin/quakestat" \
+		--with-fping-command="/usr/bin/fping" \
+		--with-fping6-command="/usr/bin/fping6" \
+		--with-ssh-command="/usr/bin/ssh" \
+		--with-sudo-command="/usr/bin/sudo" \
+		--with-mailq-command="/usr/bin/mailq" \
+		--with-proc-meminfo="/proc/meminfo" \
+		--with-dig-command="/usr/bin/dig" \
+		--with-apt-get-command="/usr/bin/apt-get" \
+		--enable-extra-opts \
+		--disable-rpath
+
+
+build: build-arch build-indep
+build-arch: build-stamp
+build-indep: build-stamp
+
+build-stamp:  config.status
+	dh_testdir
+	$(MAKE)
+	touch build-stamp
+
+clean: really-clean
+
+really-clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp debian/README.Debian.plugins debian/monitoring-plugins-standard.substvars.in
+
+	# Add here commands to clean up after the build process.
+	[ ! -f Makefile ] || $(MAKE) distclean
+	find -type d -name autom4te.cache -print0 | xargs -0 -r rm -rf \;
+	-rm -f platform.h auto-include.h
+	find -type d -name build -print0 | xargs -0 -r rm -rf \;
+	find \( -name config.sub -o -name config.guess \) -print0 | xargs -0 -r rm -f \;
+	-rm -f $(DEBIANDIR)/monitoring-plugins-basic.postrm $(DEBIANDIR)/monitoring-plugins-standard.postrm
+	dh_clean
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_prep
+	dh_installdirs
+
+	# Add here commands to install the package into debian/monitoring-plugins.
+	$(MAKE) install DESTDIR=${NP_BASIC_DIR}
+	$(MAKE) install-root DESTDIR=${NP_BASIC_DIR}
+	chmod 644 ${NP_BASIC_DIR}/usr/lib/nagios/plugins/utils.pm
+	# split up basic vs. standard plugins
+	for p in ${std_plugins}; do \
+		mv ${NP_BASIC_DIR}/${NP_LIBEXEC}/$$p ${NP_STD_DIR}/${NP_LIBEXEC}; \
+	done
+	# slit out common files
+	for p in ${common_files}; do \
+		mv ${NP_BASIC_DIR}/${NP_LIBEXEC}/$$p ${NP_COMMON_DIR}/${NP_LIBEXEC}; \
+	done
+	# remove check_uptime for now (conflicting with check_uptime from n-p-c)
+	rm ${NP_BASIC_DIR}/${NP_LIBEXEC}/check_uptime
+	# now do the same for their configs, copying them into seperate
+	# "template" directories outside of /usr/share/doc for ucf to use.
+	for c in ${basic_plugin_cfgs}; do \
+		cp $(DEBIANDIR)/pluginconfig/$${c}.cfg ${NP_BASIC_TEMPLATES}; \
+	done
+	for c in ${std_plugin_cfgs}; do \
+		cp $(DEBIANDIR)/pluginconfig/$${c}.cfg ${NP_STD_TEMPLATES}; \
+	done
+	# dynamically create the postrm scripts using a template, so that we
+	# don't have to define the same list of plugin configs over and over.
+	sed -e 's/@BASIC_PLUGINS@/${basic_plugin_cfgs}/' \
+		< $(DEBIANDIR)/monitoring-plugins-basic.postrm.in \
+		> $(DEBIANDIR)/monitoring-plugins-basic.postrm
+	sed -e 's/@STD_PLUGINS@/${std_plugin_cfgs}/' \
+		< $(DEBIANDIR)/monitoring-plugins-standard.postrm.in \
+		> $(DEBIANDIR)/monitoring-plugins-standard.postrm
+	# copy our dpkg-sourced functions etc into place
+	mkdir -p ${NP_COMMON_DIR}/usr/share/monitoring-plugins/dpkg
+	install -t ${NP_COMMON_DIR}/usr/share/monitoring-plugins/dpkg \
+		$(DEBIANDIR)/functions
+	# remove /usr/include from monitoring-plugins-basic (in case its empty and exists)
+	[ ! -d ${NP_BASIC_DIR}/usr/include ] || rmdir ${NP_BASIC_DIR}/usr/include
+	# generate debian/README.Debian.plugins
+	perl ./debian/bin/gen_plugin_deps.pl
+
+# Build architecture-independent files here.
+binary-indep: build install
+	dh_testdir -i
+	dh_testroot -i
+	dh_installchangelogs -i
+	dh_installdocs -i
+	dh_link -i
+	dh_installexamples -i
+	dh_installman -i
+	dh_compress -i
+	dh_fixperms -i
+	dh_installdeb -i
+	dh_gencontrol -i
+	dh_md5sums -i
+	dh_builddeb -i
+
+# Build architecture-dependent files here.
+binary-arch: build install
+	dh_testdir -a
+	dh_testroot -a
+	dh_installchangelogs -p monitoring-plugins-basic -a ChangeLog
+	dh_installchangelogs -Nmonitoring-plugins-basic
+	dh_installdocs -a
+	dh_link -a
+	dh_installexamples -a
+	dh_installman -a
+	dh_strip -a
+	dh_compress -a
+	dh_fixperms -a -X utils.pm
+	dh_installdeb -a
+	dh_shlibdeps -a -Nmonitoring-plugins-standard
+	dpkg-shlibdeps -Tdebian/monitoring-plugins-standard.substvars \
+		${NP_STD_DIR}/${NP_LIBEXEC}/check_dns
+	dpkg-shlibdeps -Tdebian/monitoring-plugins-standard.substvars.in \
+		-dSuggests ${NP_STD_DIR}/${NP_LIBEXEC}/check_*
+	grep shlibs:Suggests debian/monitoring-plugins-standard.substvars.in \
+		| sed -e 's/shlibs:Suggests/shlibs:Recommends/' \
+		>> debian/monitoring-plugins-standard.substvars
+	dh_gencontrol -a
+	dh_md5sums -a
+	dh_builddeb -a
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install

debian/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/source/options

@@ -0,0 +1 @@
+extend-diff-ignore = '^\.github'

debian/upstream/metadata

@@ -0,0 +1,5 @@
+Name: monitoring-plugins
+Bug-Database: https://github.com/monitoring-plugins/monitoring-plugins/issues
+Bug-Submit: https://github.com/monitoring-plugins/monitoring-plugins/issues/new
+Repository: https://github.com/monitoring-plugins/monitoring-plugins.git
+Repository-Browse: https://github.com/monitoring-plugins/monitoring-plugins

debian/watch

@@ -0,0 +1,3 @@
+version=4
+https://www.monitoring-plugins.org/download/.*-plugins-(\d+\.[\d\.a-z]+)\.tar\.gz \
+  debian debian/bin/repack.sh